Search found 909 matches
- by chrispitude
- Wed Jan 11, 2023 4:39 pm
- Forum: DITA (Editing and Publishing DITA Content)
- Topic: .ditamap file is replaced with its DITA-OT temporary file equivalent after transformation
- Replies: 5
- Views: 848
.ditamap file is replaced with its DITA-OT temporary file equivalent after transformation
While making a testcase, I was running the PDF - HTML5 & CSS transformation repeatedly. The first few transformations ran normally. The fourth failed due to a corrupted .ditamap file. It turns out that somehow the .ditamap file in my DITA source directory was overwritten with the ${dita.temp.dir...
- by chrispitude
- Mon Jan 09, 2023 3:30 pm
- Forum: DITA (Editing and Publishing DITA Content)
- Topic: To achieve a specific header for the chapter
- Replies: 7
- Views: 882
Re: To achieve a specific header for the chapter
Hi Sunil,
You could try the oxy_label() feature:
How to Style a Part of the Text from the Header
although it looks like there is a limitation with string() that will affect how you must apply the CSS.
You could try the oxy_label() feature:
How to Style a Part of the Text from the Header
although it looks like there is a limitation with string() that will affect how you must apply the CSS.
- by chrispitude
- Sat Jan 07, 2023 2:02 am
- Forum: Common Problems
- Topic: strange printing behaviors for WebHelp topics
- Replies: 12
- Views: 2190
Re: strange printing behaviors for WebHelp topics
I am hoping there are some kind of CSS print directives that can be added to the WebHelp page structure so that the topic content is printed normally without the viewport/scaling issues. Our previous online help tool supported this, although that tool placed all topic content inside an <iframe> so i...
- by chrispitude
- Sat Jan 07, 2023 1:57 am
- Forum: Common Problems
- Topic: strange printing behaviors for WebHelp topics
- Replies: 12
- Views: 2190
Re: strange printing behaviors for WebHelp topics
In Firefox, the html5 print preview is as follows: image.png In Firefox, the webhelp-responsive print preview is the same with or without a left-side TOC: image.png The page aspect ratio is still correct, but the viewport has scaled the font size down. And the right-size header is cut off, which als...
- by chrispitude
- Sat Jan 07, 2023 1:54 am
- Forum: Common Problems
- Topic: strange printing behaviors for WebHelp topics
- Replies: 12
- Views: 2190
Re: strange printing behaviors for WebHelp topics
In Chrome, the html5 print preview is as follows: image.png The webhelp-responsive print preview for a page with no left-side TOC is as follows: image.png Somehow the viewport is larger, which scales down the font size in both the content and the headers/footers. In addition, the page itself is a di...
- by chrispitude
- Sat Jan 07, 2023 1:43 am
- Forum: Common Problems
- Topic: strange printing behaviors for WebHelp topics
- Replies: 12
- Views: 2190
strange printing behaviors for WebHelp topics
We found some strange printing behaviors for WebHelp topics. Here is a testcase: webhelp_print_page.zip The project.xml file publishes a topic to html5 and webhelp-responsive , with the following simple CSS applied to both: body { font-family: Roboto, sans-serif; font-size: 14px; } .topictitle1, .wh...
- by chrispitude
- Wed Jan 04, 2023 4:13 am
- Forum: DITA (Editing and Publishing DITA Content)
- Topic: Home icon in Navbar
- Replies: 4
- Views: 554
Re: Home icon in Navbar
Hi Swapna,
Where you do want the home icon to link to? The home page of the WebHelp publication?
Where you do want the home icon to link to? The home page of the WebHelp publication?
- by chrispitude
- Wed Jan 04, 2023 4:10 am
- Forum: DITA (Editing and Publishing DITA Content)
- Topic: Questions about validation of reused topics in different keyscopes
- Replies: 3
- Views: 589
Questions about validation of reused topics in different keyscopes
We have a large WebHelp map that contains multiple books. Each book has its own keyscope. Some content is reused within multiple books, which also means the content is reused in multiple keyscope contexts. In the following example, "Book4 good" and "Book4 bad" both include a shar...
- by chrispitude
- Tue Jan 03, 2023 5:58 pm
- Forum: DITA (Editing and Publishing DITA Content)
- Topic: <abbreviated-form keyref="xxx"/>
- Replies: 7
- Views: 5340
Re: <abbreviated-form keyref="xxx"/>
Hi Julien, I was also surprised by this behavior. I filed a DITA-OT bug for it: #4026: In preprocess2, <glossref> elements are ignored but as I found, the DITA spec clearly describes that @print defaults to no for <glossref> references. I have seen other users mention that they use <topicref> instea...
- by chrispitude
- Tue Jan 03, 2023 4:13 am
- Forum: Common Problems
- Topic: Alignment of page numbers in TOC on the right side. How?
- Replies: 3
- Views: 630
Re: Alignment of page numbers in TOC on the right side. How?
Hi Dan,
I created a testcase with the TOC styles you described, but I can't reproduce the misalignment:
Can you share a simple testcase that reproduces the issue, or perhaps modify the testcase above to reproduce it?
- Chris
I created a testcase with the TOC styles you described, but I can't reproduce the misalignment:
- chemistry_deep_toc.zip
- (17.02 KiB) Downloaded 126 times
Can you share a simple testcase that reproduces the issue, or perhaps modify the testcase above to reproduce it?
- Chris
- by chrispitude
- Mon Jan 02, 2023 4:14 pm
- Forum: DITA (Editing and Publishing DITA Content)
- Topic: Sorting a table with referenced rows
- Replies: 3
- Views: 485
Re: Sorting a table with referenced rows
Hi Susanne,
In Oxygen v25, I can sort the table in this topic and content in the conref'ed rows is considered properly:
Maybe you can try the current Oxygen version and see if it works for you?
In Oxygen v25, I can sort the table in this topic and content in the conref'ed rows is considered properly:
- table.zip
- (550 Bytes) Downloaded 103 times
Maybe you can try the current Oxygen version and see if it works for you?
- by chrispitude
- Fri Dec 30, 2022 4:15 pm
- Forum: DITA (Editing and Publishing DITA Content)
- Topic: Cross reference style
- Replies: 2
- Views: 540
Re: Cross reference style
Hi sure4369,
I think you want to set the args.css.param.show-onpage-lbl transformation parameter to no. For more information, see the following page:
DITA-OT CSS Publishing to PDF Plugin > DITA-OT CSS Publishing to PDF Plugin > Overview > Transformation Parameters
I think you want to set the args.css.param.show-onpage-lbl transformation parameter to no. For more information, see the following page:
DITA-OT CSS Publishing to PDF Plugin > DITA-OT CSS Publishing to PDF Plugin > Overview > Transformation Parameters
- by chrispitude
- Thu Dec 29, 2022 5:02 pm
- Forum: General XML Questions
- Topic: exclude specific tag from word error
- Replies: 2
- Views: 762
Re: exclude specific tag from word error
Hi Shikhar,
Please see the documentation on spell-checking ignored elements here:
Home > Configuration > Preferences > Editor Preferences > Spell Check Preferences
You should be able to add your indicated element to the list of elements not to check.
Please see the documentation on spell-checking ignored elements here:
Home > Configuration > Preferences > Editor Preferences > Spell Check Preferences
You should be able to add your indicated element to the list of elements not to check.
- by chrispitude
- Thu Dec 29, 2022 4:20 pm
- Forum: Common Problems
- Topic: Alignment of page numbers in TOC on the right side. How?
- Replies: 3
- Views: 630
Re: Alignment of page numbers in TOC on the right side. How?
Hi Dan,
When I generate a generic pdf-css-html5 PDF with no custom CSS, all the page numbers are properly right-aligned.
If you temporarily remove your CSS, does it publish correctly?
When I generate a generic pdf-css-html5 PDF with no custom CSS, all the page numbers are properly right-aligned.
If you temporarily remove your CSS, does it publish correctly?
- by chrispitude
- Thu Dec 29, 2022 1:31 pm
- Forum: Common Problems
- Topic: Git Plugin fails to push, doesn't ask for credentials
- Replies: 3
- Views: 656
Re: Git Plugin fails to push, doesn't ask for credentials
Glad to hear that worked!
If you still have the old repo directory, compare the .git/config file between them. This might explain what resolved the issue.
If you still have the old repo directory, compare the .git/config file between them. This might explain what resolved the issue.
- by chrispitude
- Wed Dec 28, 2022 3:55 pm
- Forum: Common Problems
- Topic: Git Plugin fails to push, doesn't ask for credentials
- Replies: 3
- Views: 656
Re: Git Plugin fails to push, doesn't ask for credentials
Hi T, I also usually try a command-line client to get more information about issues, so it's good you've tested the repository itself. It is strange that pulling works but pushing does not. If you re-clone the repo from Oxygen in a temporary directory, can you push from that clone? Does Reset all cr...
- by chrispitude
- Fri Dec 23, 2022 6:43 pm
- Forum: Feature Request
- Topic: Resolve editor variables in string parameter default values of refactoring operations
- Replies: 3
- Views: 724
Re: Resolve editor variables in string parameter default values of refactoring operations
Thanks Radu! In my testcase, TEXT parameters do not accept empty values; the Next and Finish buttons are disabled until text is present in every TEXT field. Some TEXT parameters might require values while others are optional and can be blank. Is there a way to specify this in the descriptor file?
- by chrispitude
- Fri Dec 23, 2022 5:53 pm
- Forum: General XML Questions
- Topic: Reg exp for appending file extension
- Replies: 5
- Views: 1670
Re: Reg exp for appending file extension
Sometimes for tasks a bit more complicated than this, I create a temporary refactoring operation, run it, then delete it. It would be useful to have something like XPath/XQuery Builder , but that would let me apply XSLT templates that are not worth creating an entire refactoring operation for: <xsl:...
- by chrispitude
- Fri Dec 23, 2022 2:54 pm
- Forum: Feature Request
- Topic: "Find Unreferenced Resources" could support DITA-OT project files
- Replies: 3
- Views: 577
Re: "Find Unreferenced Resources" could support DITA-OT project files
Thanks Radu! For the first enhancement, currently I grep all the .ditamap and .ditaval files out of the context and deliverable files, then create a dummy all.ditamap file to use with Find Unreferenced Resources . But this is not something my writers know how to do, and it is not strictly correct. (...
- by chrispitude
- Fri Dec 23, 2022 4:18 am
- Forum: Feature Request
- Topic: "Find Unreferenced Resources" could support DITA-OT project files
- Replies: 3
- Views: 577
"Find Unreferenced Resources" could support DITA-OT project files
As writers update and restructure their content, we accumulate unused topics, maps, images, and even DITAVAL files. Oxygen has a well-implemented Find Unreferenced Resources feature. However, it is only invokable from the DITA Maps Manager . To run it on multiple input maps, you must open one of the...
- by chrispitude
- Wed Dec 21, 2022 7:30 pm
- Forum: Feature Request
- Topic: Resolve editor variables in string parameter default values of refactoring operations
- Replies: 3
- Views: 724
Resolve editor variables in string parameter default values of refactoring operations
In an XSLT refactoring operation, I would like the default value of a string parameter to default to the current user ID by using an Oxygen editor variable : <parameter type="TEXT" name="my-string-user" label="my-string-user"> <description>my-string-user, defaults to ${...
- by chrispitude
- Wed Dec 21, 2022 2:00 am
- Forum: DITA (Editing and Publishing DITA Content)
- Topic: Images in PDF scales and occupy full width of the page
- Replies: 8
- Views: 1173
Re: Images in PDF scales and occupy full width of the page
Hi Michael, I made a simple testcase but I cannot reproduce this behavior: chemistry_image_size.zip Are you setting the @width , @height , or @scale attribute? Maybe your PNG file somehow does not have an intrinsic size defined? Maybe you could share a simple testcase that reproduces this behavior? ...
- by chrispitude
- Tue Dec 20, 2022 3:05 pm
- Forum: DITA (Editing and Publishing DITA Content)
- Topic: Images in PDF scales and occupy full width of the page
- Replies: 8
- Views: 1173
Re: Images in PDF scales and occupy full width of the page
Hi Manoj, Can you try setting the @width or @height attribute on the <image> element? This should allow you to control the image size. You can specify units, such as 4in or 200px. You can also set the @scale attribute to a percentage value, to control size relatively instead of absolutely, such as s...
- by chrispitude
- Tue Dec 20, 2022 2:27 pm
- Forum: Common Problems
- Topic: Custom icons before the text
- Replies: 6
- Views: 1043
Re: Custom icons before the text
Hi Mr. User, Whenever I want to change something in the CSS, my first step is to see what rules are applied and where they are coming from, using the CSS inspector of my favorite browser . I suggest using the CSS inspector to see how the default icon is applied, then apply your own icon using the sa...
- by chrispitude
- Tue Dec 20, 2022 2:16 pm
- Forum: Common Problems
- Topic: Change TOC title
- Replies: 4
- Views: 637
Re: Change TOC title
Hi Mr. User,
Which transformation type are you using?
Which transformation type are you using?
- by chrispitude
- Tue Dec 20, 2022 12:21 am
- Forum: General XML Questions
- Topic: Cannot pass static parameters to XSLT refactoring operation
- Replies: 1
- Views: 552
Cannot pass static parameters to XSLT refactoring operation
In refactoring operations, I would like to allow the user to turn some features on and off. So I tried defining some static stylesheet parameters, then used them to enable templates with use-when : <xsl:param name="remove.rev" as="xs:boolean" select="true()" static=&quo...
- by chrispitude
- Mon Dec 19, 2022 4:05 pm
- Forum: Feature Request
- Topic: Update outgoing (but not incoming) references when Main Files content is copied
- Replies: 7
- Views: 1737
Re: Update outgoing (but not incoming) references when Main Files content is copied
For EXM-49471 Main Files - Update references when resources are copied there is a similar discussion here, except that it relates to copying content elements instead of files: Oxygen XML Editor > DITA (Editing and Publishing DITA Content) > Paste relative path For that issue, Alex implemented a heur...
- by chrispitude
- Sun Dec 11, 2022 1:51 pm
- Forum: DITA (Editing and Publishing DITA Content)
- Topic: Export DITA Map path issue
- Replies: 6
- Views: 703
Re: Export DITA Map path issue
Hi Gaspard, Ahh yes! I seem to recall that if the DITA-OT sees a resource outside the local root map directory, it behaves like this to try to fix the problem. I think the Syncro Soft folks would have probably known to suggest this immediately, whereas I made you work for it. :( But I'm glad you got...
- by chrispitude
- Sun Dec 11, 2022 2:13 am
- Forum: DITA (Editing and Publishing DITA Content)
- Topic: Export DITA Map path issue
- Replies: 6
- Views: 703
Re: Export DITA Map path issue
Hi Gaspard, Sometimes when I am simplifying testcases, I will read submap contents in place of their map references. And if the mapref applies a keyscope or something like that, I'll wrap it in a <topicgroup> . For example, something like this: <mapref href="submap.ditamap" keyscope="...
- by chrispitude
- Sat Dec 10, 2022 3:55 pm
- Forum: DITA (Editing and Publishing DITA Content)
- Topic: Export DITA Map path issue
- Replies: 6
- Views: 703
Re: Export DITA Map path issue
Hi Gaspard, Some questions: Which transformation are you running? Are you setting any interesting transformation parameters? If you make a copy of your project and reduce it to a single topic, does the behavior still occur? If it does not occur with a single topic, try a binary search to narrow down...
Jump to
- Oxygen XML Editor/Author/Developer
- ↳ Feature Request
- ↳ Common Problems
- ↳ DITA (Editing and Publishing DITA Content)
- ↳ SDK-API, Frameworks - Document Types
- ↳ DocBook
- ↳ TEI
- ↳ XHTML
- ↳ Other Issues
- Oxygen XML Web Author
- ↳ Feature Request
- ↳ Common Problems
- Oxygen Content Fusion
- ↳ Feature Request
- ↳ Common Problems
- Oxygen JSON Editor
- ↳ Feature Request
- ↳ Common Problems
- Oxygen PDF Chemistry
- ↳ Feature Request
- ↳ Common Problems
- Oxygen Feedback
- ↳ Feature Request
- ↳ Common Problems
- Oxygen XML WebHelp
- ↳ Feature Request
- ↳ Common Problems
- XML
- ↳ General XML Questions
- ↳ XSLT and FOP
- ↳ XML Schemas
- ↳ XQuery
- NVDL
- ↳ General NVDL Issues
- ↳ oNVDL Related Issues
- XML Services Market
- ↳ Offer a Service