Hi, So if in a DITA topic we have: <xref keyref="CONTAINER">CONTAINER</xref> and the topicref in the DITA Map where the key is defined does not point to an href resource, indeed the PDF should contain only the plain text, without a link specified on it. So the fact that the PDF fails (prob...

Hi, Just to see that I properly understand the problem, you want the equation to be saved as MathML XML content in the Docbook file but you want to edit it as Latex, right? From what I know, the Wiris developers will start working on a plugin which will allow Oxygen to edit and render MathML equatio...

Hi Frank,

Exactly, the ${framework} editor variable can only be used when editing a document type configuration. So it cannot be used anywhere externally, for example in other preference pages.

Regards,
Radu

Hi Frank, With oXygen 16 that was enough to also point oXygen to that framework's DITA-OT. If you edit your custom DITA framework, in the Catalogs list it has a reference to the catalog-dita.xml If the reference is like this: ${configured.ditaot.dir.url}/catalog-dita.xml then it would use the settin...

Hi, I also discussed in a separate email exchange with your vendor. The " cc_value_config.xml" is a feature added in Oxygen 17.0 so it will not work with Oxygen 16.1. The subject scheme map approach does not work when Oxygen is integrated with Ixiasoft because they have their own way of ed...

Hi Frank, Does the publishing work? Could you check in the Oxygen 17 installation, the Preferences->DITA page? That should be the place where the main DITA OT installation is referenced. By default its catalog-dita.xml should be added by Oxygen to the used list of XML catalogs. Could you also look i...

Hi Martin, I found a similar question here (along with workaround posted by George Bina): http://www.oxygenxml.com/forum/topic6158.html#p18868 Maybe another workaround would be to use an XML Schema to validate the XHTML parts, for example the one at: http://www.w3.org/MarkUp/SCHEMA/xhtml11.xsd which...

Hi, A couple of weeks ago I wrote a blog entry about various ways to have controlled attribute values with DITA: http://blog.oxygenxml.com/2015/07/controlled-attribute-values-for-your.html You should try the Subject Scheme Map approach. One more thing, I do not understand this remark you made: One n...

Hi, Could you tell us more about your use case? We do not currently have plans for this but I will add an issue and if we decide to add support for this new CSS 3 property we will update this forum thread. In the meantime the list of supported CSS properties is here: http://www.oxygenxml.com/doc/ver...

Hi Bogdan, The attributes you have set on the xref are fine. Actually if you use in the Oxygen Author editing mode the "Web Link" action and write the URL like mailto:support@oxygenxml.com , Oxygen will insert the xref with the proper attributes set to it. Instead of letting the xref as an...

Hi Jonas, I would do that something like: *[class ~= "topic/data"][name='disclaimer'][value]{ content: oxy_editor( type, text, edit, "@value", editable, true), ": " oxy_xpath( oxy_concat("doc('", oxy_url("../../DITA-OT/plugins/myPDFPlugin/Customization/co...

Hi Gillian, I'm not sure what the problem might be because I do not know how that DITA to WebHelp transformation scenario was configured. Do you have the same Oxygen versions? After the transformation fails, there is a "DITA OT" console view tab at the bottom containing all the logging rec...

Dear Steve, That Docbook framework related customomization is saved in the User Home in a special Oxygen XML preferences folder which contains an XML file called something like oxyOptionsSa17.1.xml depending on the product name and version with all Oxygen global settings. For example on Windows the ...

Hi, So in the tocDita.xsl I previously mentioned there is a template: <xsl:template match="/"> ......... in which there is an xsl:choose element. You can comment that out and instead of it use: <xsl:variable name="firstTopicref" select="(//*[contains(@class, ' map/topicref '...

Hi,

I would also agree with you at a first glance. My colleague who added this character to the default list is not here right now but we'll discuss this when he gets back and update the forum thread with an answer.

Regards,
Radu

Hi Michael,

Besides what Bogdan said, could you tell us the precise case in which you want the title to be on the same page with the following text content?
Because by default the DITA to PDF XSLT stylesheets already do this for most cases.

Regards,
Radu

Hi, The way that the TOC processing works is that first an XSLT stylesheet called: OXYGEN_INSTALL_DIR\frameworks\dita\DITA-OT\plugins\com.oxygenxml.webhelp\xsl\dita\tocDita.xsl which is applied over the merged DITA Map and then creates a custom TOC XML document. You can look in that XSLT at the temp...

Hi, I don't quite understand your entire setup. The top banner in the default WebHelp output displays the value of the bookmap <mainbooktitle> element, so it is not connected to the title of the first topic referenced in the map frontmatter. The title of each topic should be displayed in the TOC and...

Hi Sara, I'm not sure if I understand exactly your setup. Do you have an XML which has both English and Arabic mixed in? I tested working with your sample words both in the Text editing mode (with bidirectional editing enabled) and in the Author editing mode and I could select the ligature character...

Hi Eddie, I understand your use case and I will add an improvement request. When we manage to implement this improvement we'll update the forum thread. In the meantime you would somehow need to associate the Schematron schema with all your topics for automatic validation. You could do this in severa...

Hi Jeffrey, If resetting the options did not work (and indeed we have no setting to disable tag drag and drop) there could be two possible problems: 1) Maybe in that particular context moving the list item never worked. Does moving pieces of text (select a word and drag it) or other DITA elements st...

Hi Ann,

There might be an explanation for this.
The filters list works only in the Author editing mode. So if you are using the Text editing mode, the filters are not applied there.

Regards,
Radu

Dear Belinda, The Oxygen Eclipse plugin does not auto-save by default. It also has no particular setting for auto-save. In the Eclipse Window -> Preferences -> General -> Workspace there is a setting called Save automatically before build which might be responsible for this. Or maybe you installed a...

Dear Bob, You are seeing the sheet content on two lines because this is precisely how Excel saves it. Web browsers are not designed for editing so they can afford to present an XML in slightly different forms than it actually is saved on disk. But you also have in Oxygen the option to use the Format...

Hi Ann, Which file gets updated when I added the items to the 'Filter - Remove content completion items' list? If you did that by directly editing the DITA framework (and not by extension) then the configuration file: C:\Oxygen XML Author 17\frameworks\dita\dita.framework should have been updated. B...

Hi,

You are right, the answer I gave back then was not that elegant.
Here's another way to do that based on framework extensions:

http://www.oxygenxml.com/forum/topic11976.html

Regards,
Radu

Hi Mark, Maybe the most elegant way would be to extend the DITA framework. I wrote a blog post about this a couple of days ago: http://blog.oxygenxml.com/2015/08/document-type-extension-sharing.html After step 4 in the blog post you can create a folder called for example template_folders in your fra...

Hi Deanna, There is also a contextual menu action for editing the referenced content which you can remove by setting a popup menu customizer WSAuthorEditorPageBase.addPopUpMenuCustomizer(AuthorPopupMenuCustomizer) . Going back to your problem, after you load the XML and call authorPage.setEditable(f...

Hi Ann, If you saved the DITA document type after editing it, that should have worked. Could you try to edit it again just to see if your changes are there? Also if you open a DITA topic, in the Window->Show View menu you can show the Properties view. That view should tell you what precise document ...

Dear Ann, We do not have in our user's manual a chapter about DITA DTD specialization but there is a good tutorial about this written by Eliot Kimber (XML Guru, DITA consultant and member in the DITA OASIS committee): http://www.xiruss.org/tutorials/dita-specialization/ After a DITA DTD specializati...