Search found 48 matches
- by solarian
- Mon Jan 25, 2010 9:47 pm
- Forum: Feature Request
- Topic: Tag deletion
- Replies: 2
- Views: 2168
Re: Tag deletion
Thanks!
- by solarian
- Mon Jan 25, 2010 9:46 pm
- Forum: Common Problems
- Topic: Ouline view elides <gap/> element
- Replies: 2
- Views: 1692
Re: Ouline view elides <gap/> element
Thanks, very helpful.
- by solarian
- Sun Jan 24, 2010 3:07 am
- Forum: Common Problems
- Topic: Ouline view elides <gap/> element
- Replies: 2
- Views: 1692
Ouline view elides <gap/> element
Can anyone explain why the <gap/> element in the following example is shown in the Outline view when in Text mode but not in Author mode? <?oxygen RNGSchema="http://www.tei-c.org/release/xml/tei/custom/schema/relaxng/tei_all.rng" type="xml"?> <TEI xmlns="http://www.tei-c.org...
- by solarian
- Fri Jan 22, 2010 10:21 pm
- Forum: Feature Request
- Topic: Tag deletion
- Replies: 2
- Views: 2168
Tag deletion
When deleting a simple start tag such as <title> in Text view after highlighting it entirely, the corresponding end tag is deleted. However, if <title> has any attributes, the corresponding end tag is not deleted even if the entire start tag is highlighted before deletion. It would be nice if oXygen...
- by solarian
- Fri Jan 08, 2010 7:31 am
- Forum: Feature Request
- Topic: CSS properties: text-transform and font-variant
- Replies: 4
- Views: 3367
Re: CSS properties: text-transform and font-variant
A comparison might be made with the "content" CSS property, which is already supported.
- by solarian
- Fri Jan 08, 2010 7:21 am
- Forum: Feature Request
- Topic: CSS properties: text-transform and font-variant
- Replies: 4
- Views: 3367
Re: CSS properties: text-transform and font-variant
In that case, perhaps restrict this feature to "small-caps" so there's less possibility of confusion.
- by solarian
- Thu Jan 07, 2010 7:57 am
- Forum: Feature Request
- Topic: CSS properties: text-transform and font-variant
- Replies: 4
- Views: 3367
CSS properties: text-transform and font-variant
At present there's no way to get certain elements to appear in upper case or small caps using CSS, which would be very handy to complement text underlining, so I'd like to ask if this could be put into the request queue. Either "text-transform: capitalize" or "font-variant: small-caps...
- by solarian
- Tue Dec 15, 2009 11:53 pm
- Forum: Feature Request
- Topic: XPath Highlighting
- Replies: 8
- Views: 4158
Re: XPath Highlighting
Thanks -- much appreciated.
- by solarian
- Tue Dec 15, 2009 10:32 pm
- Forum: Feature Request
- Topic: XPath Highlighting
- Replies: 8
- Views: 4158
Re: XPath Highlighting
I've realised that this is, as far as I know, specific to the Jing parser. If one creates a TEI Bare file from the template, then adds a <note/> element with an invalid attribute: <?xml version="1.0" encoding="UTF-8"?> <?oxygen RNGSchema="http://www.tei-c.org/release/xml/tei...
- by solarian
- Tue Dec 15, 2009 2:56 am
- Forum: Feature Request
- Topic: XPath Highlighting
- Replies: 8
- Views: 4158
Re: XPath Highlighting
By the way, if it's also possible to get the same functionality when clicking on error messages, that would be similarly useful.
- by solarian
- Mon Dec 14, 2009 12:59 pm
- Forum: Feature Request
- Topic: XPath Highlighting
- Replies: 8
- Views: 4158
Re: XPath Highlighting
Excellent! This will be a great advantage.
- by solarian
- Mon Dec 14, 2009 5:12 am
- Forum: Feature Request
- Topic: XPath Highlighting
- Replies: 8
- Views: 4158
XPath Highlighting
When performing an XPath query in the toolbar (e.g., "//p"), it would be nice if, when clicking on the result in the results window, only the relevant element were highlighted instead of the entire line. e.g., if you have the following all on the same line: <div><h1>Title</h1><p>text1</p><...
- by solarian
- Sun Dec 13, 2009 5:27 pm
- Forum: Common Problems
- Topic: Embedded Schematron rules in RNC files
- Replies: 5
- Views: 3107
Re: Embedded Schematron rules in RNC files
Thanks for pointing out that Schematron is not supported when embedded in Relax NG compact (and it is perfectly easy to convert to XML syntax, so this is no problem for me at all). However, I think it would be a good idea to make this clear within oXygen and in the User Manual. At the moment, both t...
- by solarian
- Sat Dec 12, 2009 9:23 pm
- Forum: Common Problems
- Topic: Embedded Schematron rules in RNC files
- Replies: 5
- Views: 3107
Re: Embedded Schematron rules in RNC files
P.S. There is a second issue which is worth addressing separately. Using the above example file for reference, if (instead of using <?oxygen SCHSchema="..." ?> ) we click on "External Validation..." and validate it as a RelaxNG Schema in compact syntax mode (remembering to select...
- by solarian
- Sat Dec 12, 2009 9:12 pm
- Forum: Common Problems
- Topic: Embedded Schematron rules in RNC files
- Replies: 5
- Views: 3107
Embedded Schematron rules in RNC files
oXygen seems to be having trouble with embedded Schematron rules in .rnc files, but works fine with corresponding .rng files. The error it produces is: E [Schematron 1.5] org.xml.sax.SAXParseException: Content is not allowed in prolog. As an example, try validating with embedded rules using the foll...
- by solarian
- Fri Dec 11, 2009 11:04 pm
- Forum: Common Problems
- Topic: Open from file creates second instance
- Replies: 6
- Views: 3781
Re: Open from file creates second instance
Actually, I think these may be two separate issues. Using Sysinternals Tcpview, I can see that when I open oXygen from an .xpr file it doesn't bind to any port, but if I run it from the .exe file it binds to port 30008. When I run it from an .xpr file and open a file, causing a second instance to ru...
- by solarian
- Fri Dec 11, 2009 10:44 pm
- Forum: Common Problems
- Topic: Open from file creates second instance
- Replies: 6
- Views: 3781
Re: Open from file creates second instance
Does that still happen if you run oXygen directly from the oxygen.exe file? It only happens to me when I run it from an .xpr file (which I have as a shortcut on my Desktop).
- by solarian
- Fri Dec 11, 2009 9:38 pm
- Forum: Common Problems
- Topic: Open from file creates second instance
- Replies: 6
- Views: 3781
Re: Open from file creates second instance
I've done a little digging and discovered that when I start oXygen by invoking oxygen.exe then it works as you describe, but when I start oXygen from a project file (.xpr) -- which I do normally -- then any double-clicked files get opened in a second instance. Is this intentional? BTW, I'm using v11.
- by solarian
- Fri Dec 11, 2009 4:20 pm
- Forum: Common Problems
- Topic: Open from file creates second instance
- Replies: 6
- Views: 3781
Open from file creates second instance
I've noticed that if I have an instance of oXygen already running, and then double-click on an XML file somewhere on my hard drive, a new instance of oXygen is instantiated to open that file, rather than it being opened in the current instance. This can be a little awkward at times, and I for one wo...
- by solarian
- Fri Dec 11, 2009 12:37 pm
- Forum: Feature Request
- Topic: Look-around and multi-line support in Find/Replace
- Replies: 7
- Views: 4925
- by solarian
- Thu Nov 26, 2009 10:26 pm
- Forum: Common Problems
- Topic: Parsing last opened files
- Replies: 1
- Views: 1219
Parsing last opened files
In OxygenXML 11, I use .xpr files to load up different projects easily from Windows Explorer. One of my projects contains a number of big files that take a long time to parse before OxygenXML fires up, which slows the loading down a bit. However, when I close down OxygenXML after working on that pro...
- by solarian
- Thu Sep 24, 2009 10:05 am
- Forum: Other Issues
- Topic: Some attribute names not displayed in full
- Replies: 4
- Views: 2542
Re: Some attribute names not displayed in full
Of course, I didn't expect you to support 1.7. Thanks again for your help
- by solarian
- Wed Sep 23, 2009 9:38 pm
- Forum: Other Issues
- Topic: Some attribute names not displayed in full
- Replies: 4
- Views: 2542
Re: Some attribute names not displayed in full
I reset the global options and still found the problem occuring, but I realised this was because I am using JRE 1.7.0. It happens even with default settings in JRE 1.7.0, so I would imagine it's something to do with the way fonts are now handled in 1.7.0 (the reason I use it is because it includes b...
- by solarian
- Mon Sep 21, 2009 8:48 pm
- Forum: Other Issues
- Topic: Some attribute names not displayed in full
- Replies: 4
- Views: 2542
Some attribute names not displayed in full
Hi, I've noticed a small issue with the "Attributes" panel in both Editor and Author view. Some attribute names are shown in full, whilst others are only partially displayed with the "..." afterwards to indicate some characters are not being displayed. The trouble is, this seems ...
- by solarian
- Thu Aug 06, 2009 1:17 am
- Forum: Feature Request
- Topic: Text/Author split view
- Replies: 6
- Views: 4613
Re: Text/Author split view
Wow, cool... I imagine it'll be quite technically challenging. Good luck
- by solarian
- Tue Aug 04, 2009 11:14 pm
- Forum: Feature Request
- Topic: Text/Author split view
- Replies: 6
- Views: 4613
Text/Author split view
Will it ever be possible to view a file simultaneously in Text and Author view, rather like one can in Amaya?
- by solarian
- Sun Aug 02, 2009 1:56 pm
- Forum: Feature Request
- Topic: "folded" CSS property
- Replies: 12
- Views: 6879
Re: "folded" CSS property
Thanks, that's very helpful.
- by solarian
- Fri Jul 03, 2009 4:03 pm
- Forum: Common Problems
- Topic: Find & Replace with XPath
- Replies: 17
- Views: 10783
Re: Find & Replace with XPath
I assume you're aware of this, but I notice that the first problem (XPath box population on application start) has been fixed in the current installer, but the second one has not, viz.: when one re-opens the Find/Replace box and a previous XPath expression appears in the XPath box, it nevertheless d...
- by solarian
- Thu Jul 02, 2009 1:03 pm
- Forum: Common Problems
- Topic: CSS font-family property / Java fonts
- Replies: 5
- Views: 3348
Re: CSS font-family property / Java fonts
Thanks for a speedy fix.
- by solarian
- Wed Jul 01, 2009 4:37 pm
- Forum: Common Problems
- Topic: CSS font-family property / Java fonts
- Replies: 5
- Views: 3348
Re: CSS font-family property / Java fonts
Hi, You are right, it is a regression in version 10.3. We identified the cause and we will let you know when you can download a new build that fixes the problem. Thanks, much appreciated. There is a procedure for specifying a font for the PDF output of a TEI transformation . You should make sure tha...
Jump to
- Oxygen XML Editor/Author/Developer
- ↳ Feature Request
- ↳ Common Problems
- ↳ DITA (Editing and Publishing DITA Content)
- ↳ SDK-API, Frameworks - Document Types
- ↳ DocBook
- ↳ TEI
- ↳ XHTML
- ↳ Other Issues
- Oxygen XML Web Author
- ↳ Feature Request
- ↳ Common Problems
- Oxygen Content Fusion
- ↳ Feature Request
- ↳ Common Problems
- Oxygen JSON Editor
- ↳ Feature Request
- ↳ Common Problems
- Oxygen PDF Chemistry
- ↳ Feature Request
- ↳ Common Problems
- Oxygen Feedback
- ↳ Feature Request
- ↳ Common Problems
- Oxygen XML WebHelp
- ↳ Feature Request
- ↳ Common Problems
- XML
- ↳ General XML Questions
- ↳ XSLT and FOP
- ↳ XML Schemas
- ↳ XQuery
- NVDL
- ↳ General NVDL Issues
- ↳ oNVDL Related Issues
- XML Services Market
- ↳ Offer a Service