[oXygen-user] XSD Validation Error
Helder Rossa
Thu Dec 1 07:17:16 CST 2005
HI George,
Thanx for the info. I'll check deeply the specifications.
On Thu, 2005-12-01 at 15:05 +0200, George Cristian Bina wrote:
> Dear Helder,
>
> I think this is an error in the spec. If you read a few lines above that
> you will see that if no namespace attribute is specified then the
> imported schema is for no namespace components:
> ***
> If that attribute is absent, then the import allows unqualified
> reference to components with no target namespace.
> ***
> So clearly there should not be a targetNamespace attribute present in
> that schema, because having such an attribute will place the components
> defined in that schema in that namespace.
>
> Oxygen uses Xerces-J 2.7.1 for XML Schema validation. If you test also
> with other schema processors you will see that they report this error, I
> tried Schema Quality Checker, MSXML.NET and MSXML 4.0, Saxon SA and XSV
> and they all complain about this.
>
> Best Regards,
> George
> ---------------------------------------------------------------------
> George Cristian Bina
> <oXygen/> XML Editor, Schema Editor and XSLT Editor/Debugger
> http://www.oxygenxml.com
>
>
> Helder Rossa wrote:
> > Hi,
> >
> > I Will investigate the second error like you say. but in XML Spy no
> > error is reported.
> >
> > The first one I think is an error because the targetNamespace in the
> > imported file, and like the error says, has a targetNamespace
> > 'uri:namespace' so no 'namespace' attribute needs to be included in the
> > import directive.
> >
> > Here is the RIGHT specification in the W3C:
> >
> > 1 The appropriate *case* among the following must be true:
> >
> > 1.1 *If *the namespace [attribute]
> > <http://www.w3.org/TR/xml-infoset/#infoitem.element> is present,
> > *then *its · <http://www.w3.org/TR/xmlschema-1/#key-vv>actual value
> > <http://www.w3.org/TR/xmlschema-1/#key-vv>·
> > <http://www.w3.org/TR/xmlschema-1/#key-vv> must not match the ·
> > <http://www.w3.org/TR/xmlschema-1/#key-vv>actual value
> > <http://www.w3.org/TR/xmlschema-1/#key-vv>·
> > <http://www.w3.org/TR/xmlschema-1/#key-vv> of the enclosing <schema>
> > <http://www.w3.org/TR/xmlschema-1/#element-schema>'s targetNamespace
> > [attribute] <http://www.w3.org/TR/xml-infoset/#infoitem.element>.
> >
> > 1.2 *If *the namespace [attribute]
> > <http://www.w3.org/TR/xml-infoset/#infoitem.element> is not present,
> > *then *the enclosing <schema>
> > <http://www.w3.org/TR/xmlschema-1/#element-schema> must have a
> > targetNamespace [attribute]
> > <http://www.w3.org/TR/xml-infoset/#infoitem.element>
> >
> >
> > So, the namespace is NOT present in the <import> and I HAVE a
> > targetNamespace in the <import>ed schema.
> >
> >
> >
> > On Wed, 2005-11-30 at 23:11 +0200, George Cristian Bina wrote:
> >> Dear Helder Rossa,
> >>
> >> One of the nice features that you can find in oXygen is that it reports
> >> XML Schema errors in most cases not only with a descriptive message but
> >> also with a pointer to the XML Schema specification, pointing to the
> >> exact location related with that error.
> >> In your case it poins you to
> >> http://www.w3.org/TR/xmlschema-1/#src-import
> >> The error code is src-import.3.2 which related with the pint 3.2 from
> >> the above URL:
> >> ***
> >> 3 The appropriate case among the following must be true:
> >> 3.1 If there is a namespace [attribute], then its ·actual value· must be
> >> identical to the ·actual value· of the targetNamespace [attribute] of SII.
> >> 3.2 If there is no namespace [attribute], then SII must have no
> >> targetNamespace [attribute]
> >> ***
> >> So as you can see, if no namespace attribute is specified then the
> >> imported schema must have no targetNamespace and this is not true in
> >> your case.
> >>
> >> Your email does not describes the exact details of the second error but
> >> I think that you want to say that oXygen does not allow the use
> >> attribute in a global attribute declaration but allows this in an
> >> attribute inside a complex type for instance. The oXygen behavior is
> >> correct and the explanation is that in one case we have an attribute
> >> declaration that can be used differently from different places and in
> >> the other case an attribute use. The error code s4s-att-not-allowed
> >> means that this is not allowed by the schema for schemas (s4s). And if
> >> you look into the schema for schemas you can see that the attribute
> >> element is of type topLevelAttribute that restricts the attribute type
> >> making the use of the "use" attribute prohibited.
> >>
> >> <xs:element id="attribute" name="attribute"
> >> type="xs:topLevelAttribute">
> >> </xs:element>
> >>
> >> <xs:complexType name="topLevelAttribute">
> >> <xs:complexContent>
> >> <xs:restriction base="xs:attribute">
> >> <xs:sequence>
> >> <xs:element minOccurs="0" ref="xs:annotation"/>
> >> <xs:element minOccurs="0" name="simpleType"
> >> type="xs:localSimpleType">
> >> </xs:element>
> >> </xs:sequence>
> >> <xs:attribute name="ref" use="prohibited"/>
> >> <xs:attribute name="form" use="prohibited"/>
> >> <xs:attribute name="use" use="prohibited"/>
> >> ------------------------------------^^^^^^^^^^^^^^^^^^^^^^^
> >>
> >> <xs:attribute name="name" type="xs:NCName" use="required">
> >> </xs:attribute>
> >> <xs:anyAttribute namespace="##other"
> >> processContents="lax"/>
> >> </xs:restriction>
> >> </xs:complexContent>
> >> </xs:complexType>
> >>
> >> Hope things are clear now.
> >>
> >> Best Regards,
> >> George
> >>
> >>
> >> Helder Rossa wrote:
> >> > Hi,
> >> >
> >> >
> >> >
> >> > I’ve got several errors validating a correct xsd file in oXygen Eclipse
> >> > Plug-In.
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > *Importing a XSD File*
> >> >
> >> >
> >> >
> >> > Error:
> >> >
> >> > src-import.3.2: An <import> element information item that had no
> >> > namespace attribute was found, so the imported document cannot have a
> >> > targetNamespace attribute. However, the targetNamespace 'uri:namespace'
> >> > was found in the imported document.
> >> >
> >> > @see: http://www.w3.org/TR/xmlschema-1/#src-import
> >> >
> >> >
> >> >
> >> > Occurs when:
> >> >
> >> > <xs:import schemaLocation="anotherfile.xsd" />
> >> >
> >> >
> >> >
> >> > Only works when:
> >> >
> >> > <xs:import namespace=”uri:namespace” schemaLocation="anotherfile.xsd" />
> >> >
> >> >
> >> >
> >> > This is incorrect!!
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > *Use Attribute in a Element*
> >> >
> >> >
> >> >
> >> > Error:
> >> >
> >> > s4s-att-not-allowed: Attribute 'use' cannot appear in element 'attribute'.
> >> >
> >> >
> >> >
> >> > Occurs when:
> >> >
> >> > <xs:attribute name="type" type="xs:string" use="required" />
> >> >
> >> >
> >> >
> >> > Only Works when:
> >> >
> >> > <xs:attribute name="type" type="xs:string" use="required" />
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > This is incorrect because use attribute is OK.
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > What I have to configure for oXygen work corrrectly?!
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > Thanx
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > ------------------------------------------------------------------------
> >> >
> >> > _______________________________________________
> >> > oXygen-user mailing list
> >> > <mailto:>
> >> > http://www.oxygenxml.com/mailman/listinfo/oxygen-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.oxygenxml.com/pipermail/oxygen-user/attachments/20051201/aaafc4d6/attachment.html
More information about the oXygen-user
mailing list