From bogus@does.not.exist.com  Sun Aug  1 19:13:04 2004
From: bogus@does.not.exist.com (Peter Charles)
Date: Sun, 1 Aug 2004 17:13:04 -0700
Subject: [oXygen-user] Woking wih files on the nework
Message-ID: <000201c47825$7d412180$0200a8c0@FATCITYMB>

Hello,

When working with files that are store on a network drive I get the
following error when trying to execute a transformation:

SystemID: null
Description: \dev\eclipse\workspace\misc\ui\xml\advanced-search.xml_xslt
(The system cannot find the path specified)

Thanks

Peter

-----<CDE/>-----
Center for Document Engineering
University of California, Berkeley
cde.berkeley.edu




From bogus@does.not.exist.com  Mon Aug  2 01:49:06 2004
From: bogus@does.not.exist.com (Dan Caprioara)
Date: Mon, 02 Aug 2004 09:49:06 +0300
Subject: [oXygen-user] Woking wih files on the nework
In-Reply-To: <000201c47825$7d412180$0200a8c0@FATCITYMB>
References: <000201c47825$7d412180$0200a8c0@FATCITYMB>
Message-ID: <410DE3E2.1090802@oxygenxml.com>

Hello,
Oxygen is writing the transformation result in a temporary file, in the 
same directory as your xml file. Since the xml file is on another host, 
it fails to write/load it due to a path representation problem for the 
network files.
I will add this problem to our todo list and will find a workaround for it.

Thank you for letting us know,

Dan

Peter Charles wrote:

>Hello,
>
>When working with files that are store on a network drive I get the
>following error when trying to execute a transformation:
>
>SystemID: null
>Description: \dev\eclipse\workspace\misc\ui\xml\advanced-search.xml_xslt
>(The system cannot find the path specified)
>
>Thanks
>
>Peter
>
>-----<CDE/>-----
>Center for Document Engineering
>University of California, Berkeley
>cde.berkeley.edu
>
>
>
>_______________________________________________
>oXygen-user mailing list
>oXygen-user at 
>http://www.oxygenxml.com/mailman/listinfo/oxygen-user
>  
>


From bogus@does.not.exist.com  Mon Aug  2 02:00:49 2004
From: bogus@does.not.exist.com (Dan Caprioara)
Date: Mon, 02 Aug 2004 10:00:49 +0300
Subject: [oXygen-user] Woking wih files on the nework
In-Reply-To: <000201c47825$7d412180$0200a8c0@FATCITYMB>
References: <000201c47825$7d412180$0200a8c0@FATCITYMB>
Message-ID: <410DE6A1.6040504@oxygenxml.com>

One fix is to map the network share as a network drive. If your share is 
\\dev\eclipse then you could map it to the drive E: for instance. Oxygen 
will consider the remote files as "local".

Dan

Peter Charles wrote:

>Hello,
>
>When working with files that are store on a network drive I get the
>following error when trying to execute a transformation:
>
>SystemID: null
>Description: \dev\eclipse\workspace\misc\ui\xml\advanced-search.xml_xslt
>(The system cannot find the path specified)
>
>Thanks
>
>Peter
>
>-----<CDE/>-----
>Center for Document Engineering
>University of California, Berkeley
>cde.berkeley.edu
>
>
>
>_______________________________________________
>oXygen-user mailing list
>oXygen-user at 
>http://www.oxygenxml.com/mailman/listinfo/oxygen-user
>  
>


From bogus@does.not.exist.com  Wed Aug  4 03:25:42 2004
From: bogus@does.not.exist.com (Perez Carmona, David)
Date: Wed, 4 Aug 2004 10:25:42 +0200
Subject: [oXygen-user] Tab indent annoying behavior
Message-ID: <CA47BB2706D4CE4497C233DB9FCDB5714063EA@blconexc1.sg.gr.fcc.es>


Hi all,

I'm quite happy with Oxygen editor, but I find a little annoying behavior.
Unlike many text editors such as notepad, Eclipse, jEdit and many others, if I select multiple lines and press tab, one additional line at the end is also processed.

In the attached screenshot, I want to indent the <table> element but also the </xsl:for-each> is indented!!!

Can this behavior be corrected or at least make it configurable?

Thanks,

David P?rez


*************************************************************
Este correo ha sido procesado por el Antivirus del Grupo FCC
*************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.oxygenxml.com/pipermail/oxygen-user/attachments/20040804/25936e7e/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: screenshot.gif
Type: image/gif
Size: 18217 bytes
Desc: screenshot.gif
Url : http://www.oxygenxml.com/pipermail/oxygen-user/attachments/20040804/25936e7e/attachment.gif 

From bogus@does.not.exist.com  Wed Aug  4 03:53:28 2004
From: bogus@does.not.exist.com (George Cristian Bina)
Date: Wed, 4 Aug 2004 11:53:28 +0300
Subject: [oXygen-user] Tab indent annoying behavior
References: <CA47BB2706D4CE4497C233DB9FCDB5714063EA@blconexc1.sg.gr.fcc.es>
Message-ID: <011001c47a00$84321580$1300000a@spelling>

Hi David,

I just replied to a similar entry on the oxygen forum:
http://www.oxygenxml.com/forum/ftopic526.html

Best Regards,
George
-------------------------------------------------------------
George Cristian Bina mailto:george at 
<oXygen/> XML Editor - http://www.oxygenxml.com/


----- Original Message -----
From: "Perez Carmona, David" <DPerezCar at >
To: <oxygen-user at >
Sent: Wednesday, August 04, 2004 11:25 AM
Subject: [oXygen-user] Tab indent annoying behavior



Hi all,

I'm quite happy with Oxygen editor, but I find a little annoying behavior.
Unlike many text editors such as notepad, Eclipse, jEdit and many others, if
I select multiple lines and press tab, one additional line at the end is
also processed.

In the attached screenshot, I want to indent the <table> element but also
the </xsl:for-each> is indented!!!

Can this behavior be corrected or at least make it configurable?

Thanks,

David P?rez


*************************************************************
Este correo ha sido procesado por el Antivirus del Grupo FCC
*************************************************************


----------------------------------------------------------------------------
----


> _______________________________________________
> oXygen-user mailing list
> oXygen-user at 
> http://www.oxygenxml.com/mailman/listinfo/oxygen-user
>


From bogus@does.not.exist.com  Wed Aug  4 07:19:09 2004
From: bogus@does.not.exist.com (Dr. Heino Speer)
Date: Wed,  4 Aug 2004 14:19:09 +0200
Subject: [oXygen-user] Syntax Hyperlink
Message-ID: <1091621949.4110d43de8196@wwwmail.urz.uni-heidelberg.de>

Dear list,
I'm writing a TEI-document with this header:
<?xml version="1.0" encoding="ISO-8859-1"?>
<?xml-stylesheet type="xml/xslt"
href="file:///C:/Programme/Oxygen4.2/TEI//xsl/html/teihtml-teic.xsl"?>
<!DOCTYPE TEI.2 PUBLIC "-//TEI Consortium//DTD TEI Lite XML ver. 1//EN"
		       "file:///C:/Programme/Oxygen4.2/tei/dtd/teixlite.dtd" [
<!ENTITY % TEI.XML 'INCLUDE'>
]>

and try to write a hyperlink to an external file. While transforming the text in
a html-file, the link
 
<xptr doc='FRREF1578.7.12.3'/>

will be transformed in this way:

<a href="" class="quicklink" target="_top"> 

How can I resolve this problem?

Thanks in advance
Heino Speer

-- 
Dr. Heino Speer
Deutsches Rechtsw?rterbuch
Heidelberger Akademie der Wissenschaften
Karlstr. 4
D-69117 Heidelberg
Telephon: 06221-543270 Fax: 06221-543369
Leitseite DRW: http://www.deutsches-rechtswoerterbuch.de
Leitseite HDHS: http://hdhs.de 

From bogus@does.not.exist.com  Wed Aug  4 09:06:23 2004
From: bogus@does.not.exist.com (George Cristian Bina)
Date: Wed, 4 Aug 2004 17:06:23 +0300
Subject: [oXygen-user] Syntax Hyperlink
References: <1091621949.4110d43de8196@wwwmail.urz.uni-heidelberg.de>
Message-ID: <02f501c47a2c$3b4b3230$1300000a@spelling>

Dear Heino Speer,

If you will look in the new model view in oXygen while you have the cursor
inside the xptr element you will see that the doc attribute has the
attribute type ENTITY. That means that it should contains as value the name
of an entity. The stylesheet deals with this accordingly, calling the
unparsed-entity-uri() funtion on it in order to get the actual value. The
relevant part of the stylesheets that deal with xptr starts at line 317 in
teihtml-xref.xsl.

In order to make this work you should have an ENTITY with the name
FRREF1578.7.12.3 declared in your DTD. For instance if you have the DTD
declaration as below:

<!DOCTYPE TEI.2 PUBLIC "-//TEI P4//ELEMENTS TEI Lite XML ver. 1//EN"
                       "http://www.tei-c.org/Lite/DTD/teixlite.dtd" [

 <!ENTITY FRREF1578.7.12.3 SYSTEM
"http://www.oxygenxml.com/img/oxygen-win.gif" NDATA gif>

]>

then you should get:

<a href="http://www.oxygenxml.com/img/oxygen-win.gif" class="quicklink"
target="_top">

Best Regards,
George
-------------------------------------------------------------
George Cristian Bina mailto:george at 
<oXygen/> XML Editor - http://www.oxygenxml.com/


----- Original Message -----
From: "Dr. Heino Speer" <heino.speer at >
To: <oxygen-user at >
Sent: Wednesday, August 04, 2004 3:19 PM
Subject: [oXygen-user] Syntax Hyperlink


> Dear list,
> I'm writing a TEI-document with this header:
> <?xml version="1.0" encoding="ISO-8859-1"?>
> <?xml-stylesheet type="xml/xslt"
> href="file:///C:/Programme/Oxygen4.2/TEI//xsl/html/teihtml-teic.xsl"?>
> <!DOCTYPE TEI.2 PUBLIC "-//TEI Consortium//DTD TEI Lite XML ver. 1//EN"
>        "file:///C:/Programme/Oxygen4.2/tei/dtd/teixlite.dtd" [
> <!ENTITY % TEI.XML 'INCLUDE'>
> ]>
>
> and try to write a hyperlink to an external file. While transforming the
text in
> a html-file, the link
>
> <xptr doc='FRREF1578.7.12.3'/>
>
> will be transformed in this way:
>
> <a href="" class="quicklink" target="_top">
>
> How can I resolve this problem?
>
> Thanks in advance
> Heino Speer
>
> --
> Dr. Heino Speer
> Deutsches Rechtsw?rterbuch
> Heidelberger Akademie der Wissenschaften
> Karlstr. 4
> D-69117 Heidelberg
> Telephon: 06221-543270 Fax: 06221-543369
> Leitseite DRW: http://www.deutsches-rechtswoerterbuch.de
> Leitseite HDHS: http://hdhs.de
> _______________________________________________
> oXygen-user mailing list
> oXygen-user at 
> http://www.oxygenxml.com/mailman/listinfo/oxygen-user
>


From bogus@does.not.exist.com  Wed Aug  4 09:07:16 2004
From: bogus@does.not.exist.com (Steve Lay)
Date: Wed, 4 Aug 2004 15:07:16 +0100
Subject: [oXygen-user] <import/> and validation
Message-ID: <p0611046ebd369a17c97f@[131.111.152.194]>

I've been trying to validate the current MathML schema and I'm getting the
unhelpful error message "E Null" as a result.  I've figured out that that
means that a schemaLocation is missing (but agreed with others that this
should be expanded into something that doesn't take so much research to
figure out).

Anyway, the line that is causing me trouble is:

<xs:import/>

This line is followed by the helpful comment "import any foreign namespace".

Now I know that "This simply allows unqualified reference to foreign
components with no target namespace without giving any hints as to where to
find them." but the schema doesn't contain any such references as far as I
can see and commenting out the line allows it to validate.

Perhaps it would be more useful to get Oxygen to defer its disapproval
until it finds a reference for which no definition exists?

Or am I misunderstanding what is going on here.

Steve

From bogus@does.not.exist.com  Thu Aug  5 05:07:02 2004
From: bogus@does.not.exist.com (George Cristian Bina)
Date: Thu, 5 Aug 2004 13:07:02 +0300
Subject: [oXygen-user] <import/> and validation
References: <p0611046ebd369a17c97f@[131.111.152.194]>
Message-ID: <00aa01c47ad3$f6596b80$1300000a@spelling>

Hi Steve,

Thanks for your message.

Sure the <import/> should be validated, the XML Schema specification
specifically allows it:

<quote source="http://www.w3.org/TR/xmlschema-1/#composition-schemaImport">
 NOTE: Since both the namespace and schemaLocation [attribute] are optional,
a bare <import/> information item is allowed. This simply allows unqualified
reference to foreign components with no target namespace without giving any
hints as to where to find them.
</quote>

We already found the problem in oXygen and fix it. It was a bug in the
catalog resolver that rised an exception when the resource to be resolved
had all the fields set to null.

Best Regards,
George
-------------------------------------------------------------
George Cristian Bina mailto:george at 
<oXygen/> XML Editor - http://www.oxygenxml.com/


----- Original Message -----
From: "Steve Lay" <S.W.Lay at >
To: <oxygen-user at >
Sent: Wednesday, August 04, 2004 5:07 PM
Subject: [oXygen-user] <import/> and validation


> I've been trying to validate the current MathML schema and I'm getting the
> unhelpful error message "E Null" as a result.  I've figured out that that
> means that a schemaLocation is missing (but agreed with others that this
> should be expanded into something that doesn't take so much research to
> figure out).
>
> Anyway, the line that is causing me trouble is:
>
> <xs:import/>
>
> This line is followed by the helpful comment "import any foreign
namespace".
>
> Now I know that "This simply allows unqualified reference to foreign
> components with no target namespace without giving any hints as to where
to
> find them." but the schema doesn't contain any such references as far as I
> can see and commenting out the line allows it to validate.
>
> Perhaps it would be more useful to get Oxygen to defer its disapproval
> until it finds a reference for which no definition exists?
>
> Or am I misunderstanding what is going on here.
>
> Steve
> _______________________________________________
> oXygen-user mailing list
> oXygen-user at 
> http://www.oxygenxml.com/mailman/listinfo/oxygen-user
>


From bogus@does.not.exist.com  Fri Aug  6 07:05:24 2004
From: bogus@does.not.exist.com (Perez Carmona, David)
Date: Fri, 6 Aug 2004 14:05:24 +0200
Subject: [oXygen-user] No completion for exclude-result-prefixes
Message-ID: <CA47BB2706D4CE4497C233DB9FCDB5714063ED@blconexc1.sg.gr.fcc.es>


Hi all,

While editing an XSLT sheet, I don't get code assist for

xsl:stylesheet/@exclude-result-prefixes

Is this a bug?

David



*************************************************************
Este correo ha sido procesado por el Antivirus del Grupo FCC
*************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.oxygenxml.com/pipermail/oxygen-user/attachments/20040806/d19fd2c2/attachment.html 

From bogus@does.not.exist.com  Fri Aug  6 08:06:28 2004
From: bogus@does.not.exist.com (George Cristian Bina)
Date: Fri, 6 Aug 2004 16:06:28 +0300
Subject: [oXygen-user] No completion for exclude-result-prefixes
References: <CA47BB2706D4CE4497C233DB9FCDB5714063ED@blconexc1.sg.gr.fcc.es>
Message-ID: <01db01c47bb6$3120bd30$1300000a@spelling>

Hi David,

The content completion shows the exclude-result-prefixes attribute in the
attributes for xsl:stylesheet. Are you referring to something else ?

Best Regards,
George
-------------------------------------------------------------
George Cristian Bina mailto:george at 
<oXygen/> XML Editor - http://www.oxygenxml.com/


----- Original Message -----
From: "Perez Carmona, David" <DPerezCar at >
To: "Oxygen (E-mail)" <oxygen-user at >
Sent: Friday, August 06, 2004 3:05 PM
Subject: [oXygen-user] No completion for exclude-result-prefixes



Hi all,

While editing an XSLT sheet, I don't get code assist for

xsl:stylesheet/@exclude-result-prefixes

Is this a bug?

David



*************************************************************
Este correo ha sido procesado por el Antivirus del Grupo FCC
*************************************************************


----------------------------------------------------------------------------
----


> _______________________________________________
> oXygen-user mailing list
> oXygen-user at 
> http://www.oxygenxml.com/mailman/listinfo/oxygen-user
>


From bogus@does.not.exist.com  Fri Aug  6 07:28:42 2004
From: bogus@does.not.exist.com (Perez Carmona, David)
Date: Fri, 6 Aug 2004 14:28:42 +0200
Subject: [oXygen-user] No line number in status bar
Message-ID: <CA47BB2706D4CE4497C233DB9FCDB5714063EE@blconexc1.sg.gr.fcc.es>


Hi all,

I've realized that no line number nor column number appear in the status bar.

I think it must be very easy to do so, and useful.

David


*************************************************************
Este correo ha sido procesado por el antivirus del Grupo FCC.
*************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.oxygenxml.com/pipermail/oxygen-user/attachments/20040806/a592e1a5/attachment.html 

From bogus@does.not.exist.com  Fri Aug  6 08:55:09 2004
From: bogus@does.not.exist.com (George Cristian Bina)
Date: Fri, 6 Aug 2004 16:55:09 +0300
Subject: [oXygen-user] No line number in status bar
References: <CA47BB2706D4CE4497C233DB9FCDB5714063EE@blconexc1.sg.gr.fcc.es>
Message-ID: <01f101c47bbc$fe1d55e0$1300000a@spelling>

Hi David,

Oxygen shows the line and column in the status bar, you can see this for
instance in the following screenshot:
http://www.oxygenxml.com/img/oxygen-mac.gif

It also shows if the file was modified or not, the complete filename, the
last action status and the code of the character at cursor.

Best Regards,
George
P.S.
Please join the list to have your posts accepted automatically.
-------------------------------------------------------------
George Cristian Bina mailto:george at 
<oXygen/> XML Editor - http://www.oxygenxml.com/


----- Original Message -----
From: "Perez Carmona, David" <DPerezCar at >
To: "Oxygen (E-mail)" <oxygen-user at >
Sent: Friday, August 06, 2004 3:28 PM
Subject: [oXygen-user] No line number in status bar



Hi all,

I've realized that no line number nor column number appear in the status
bar.

I think it must be very easy to do so, and useful.

David


*************************************************************
Este correo ha sido procesado por el antivirus del Grupo FCC.
*************************************************************


----------------------------------------------------------------------------
----


> _______________________________________________
> oXygen-user mailing list
> oXygen-user at 
> http://www.oxygenxml.com/mailman/listinfo/oxygen-user
>


From bogus@does.not.exist.com  Mon Aug  9 13:50:37 2004
From: bogus@does.not.exist.com (Sean Wheller)
Date: Mon, 9 Aug 2004 20:50:37 +0200
Subject: [oXygen-user] plug-in
Message-ID: <200408092050.37914.sean@enbaya.co.za>

I wish to configure jsvn as a plugin to oxygen, is it possible.

I created plugin.xml valid to plugin.dtd but am not sure how to complete it so 
it will work.

<!DOCTYPE plugin SYSTEM "../plugin.dtd">
<plugin
    name="JSVN"
    description="Java Swing Interface to Subversion (SVN client required)"
    version="0.8"
    vendor="Alternate Computing Solutions"
    class="???????">
    <runtime>
        <library name="jsvn-0.8.jar"/>
    </runtime>
    <extension type="?????" 
    class="????"/>
</plugin>

-- 
Sean Wheller
sean at 
http://www.enbaya.co.za

From bogus@does.not.exist.com  Tue Aug 10 01:18:11 2004
From: bogus@does.not.exist.com (Dan Caprioara)
Date: Tue, 10 Aug 2004 09:18:11 +0300
Subject: [oXygen-user] plug-in
In-Reply-To: <200408092050.37914.sean@enbaya.co.za>
References: <200408092050.37914.sean@enbaya.co.za>
Message-ID: <411868A3.1000800@oxygenxml.com>

Hello Sean,

Unfortunately it is not possible to configure JSVN as an Oxygen plugin. 
In any plugin framework the plugins must implement some interfaces 
defined by the enclosing application. JSVN is not implementing the 
Plugin interface defined by Oxygen.

Dan.

PS: The class attributes from the plugin.xml are specifying the Java 
class from the plugin jar that implements the Oxygen Plugin interface.

Sean Wheller wrote:

>I wish to configure jsvn as a plugin to oxygen, is it possible.
>
>I created plugin.xml valid to plugin.dtd but am not sure how to complete it so 
>it will work.
>
><!DOCTYPE plugin SYSTEM "../plugin.dtd">
><plugin
>    name="JSVN"
>    description="Java Swing Interface to Subversion (SVN client required)"
>    version="0.8"
>    vendor="Alternate Computing Solutions"
>    class="???????">
>    <runtime>
>        <library name="jsvn-0.8.jar"/>
>    </runtime>
>    <extension type="?????" 
>    class="????"/>
></plugin>
>
>  
>


From bogus@does.not.exist.com  Tue Aug 10 01:54:59 2004
From: bogus@does.not.exist.com (Sean Wheller)
Date: Tue, 10 Aug 2004 08:54:59 +0200
Subject: [oXygen-user] plug-in
In-Reply-To: <411868A3.1000800@oxygenxml.com>
References: <200408092050.37914.sean@enbaya.co.za>
	<411868A3.1000800@oxygenxml.com>
Message-ID: <200408100854.59154.sean@enbaya.co.za>

On Tuesday 10 August 2004 08:18, Dan Caprioara wrote:
> The class attributes from the plugin.xml are specifying the Java
> class from the plugin jar that implements the Oxygen Plugin interface.

Where does one find more information about the Oxygen Plugin interface so that 
JSVN can be modified to support plugin to Oxygen?
-- 
Sean Wheller
sean at 
http://www.enbaya.co.za

From bogus@does.not.exist.com  Wed Aug 11 01:09:58 2004
From: bogus@does.not.exist.com ()
Date: Wed, 11 Aug 2004 16:09:58 +1000
Subject: [oXygen-user] Can't find xlinks when validating a document
Message-ID: <E97B4331B4C19943B69A80E15DE45C260135555E@mail1.agso.gov.au>

Hi,

I am trying to validate an xml record in which there are lots of "import"
statements and "include" statements to various W3C XML Schemas.  One of the
XML Schemas is xlinks.xsd.  The namespace is http://www.w3.org/1999/xlink but
I can't seem to find the actual xlinks.xsd from this URI.

Does anyone know where xlinks.xsd is?

Thanks.


John Hockaday
Geoscience Australia
GPO Box 378
Canberra ACT 2601
(02) 6249 9735
http://www.ga.gov.au/ 
john.hockaday at 


From bogus@does.not.exist.com  Wed Aug 11 01:59:59 2004
From: bogus@does.not.exist.com (Sorin Ristache)
Date: Wed, 11 Aug 2004 09:59:59 +0300
Subject: [oXygen-user] Can't find xlinks when validating a document
In-Reply-To: <E97B4331B4C19943B69A80E15DE45C260135555E@mail1.agso.gov.au>
References: <E97B4331B4C19943B69A80E15DE45C260135555E@mail1.agso.gov.au>
Message-ID: <4119C3EF.9020000@sync.ro>

The schema was developed by the OpenGIS Consortium:

http://schemas.opengis.net/gml/2.1.2/xlinks.xsd

Regards,
Sorin


John.Hockaday at  wrote:

> Hi,
> 
> I am trying to validate an xml record in which there are lots of "import"
> statements and "include" statements to various W3C XML Schemas.  One of the
> XML Schemas is xlinks.xsd.  The namespace is http://www.w3.org/1999/xlink but
> I can't seem to find the actual xlinks.xsd from this URI.
> 
> Does anyone know where xlinks.xsd is?
> 
> Thanks.
> 
> 
> John Hockaday
> Geoscience Australia
> GPO Box 378
> Canberra ACT 2601
> (02) 6249 9735
> http://www.ga.gov.au/ 
> john.hockaday at 
> 
> _______________________________________________
> oXygen-user mailing list
> oXygen-user at 
> http://www.oxygenxml.com/mailman/listinfo/oxygen-user

From bogus@does.not.exist.com  Wed Aug 11 22:48:22 2004
From: bogus@does.not.exist.com ()
Date: Thu, 12 Aug 2004 13:48:22 +1000
Subject: [oXygen-user] Can't find xlinks when validating a document
Message-ID: <E97B4331B4C19943B69A80E15DE45C2601355561@mail1.agso.gov.au>

Sorin,

Thanks for that information but now I am really confused.  While I was
waiting for a reply on this list I did manage to find a copy of xlinks.xsd
with a GML3.1 specification.  The trouble is I don't know which one is the
latest version.

The application information held in the xlinks.xsd that you suggested is as
follows:

<annotation>
  <appinfo>xlinks.xsd v2.1.2 2002-07</appinfo> 
  <documentation xml:lang="en">This schema provides the XLink attributes for
general use.</documentation> 
  </annotation>

The application information held in the xlinks.xsd that I found is as
follows:

<annotation>
  <appinfo
source="urn:opengis:specification:gml:schema-xlinks:v3.0c2">xlinks.xsd v3.0b2
2001-07</appinfo>
  <documentation>
    GML 3.0 candidate xlinks schema. Copyright (c) 2001 OGC, All Rights
Reserved.
  </documentation>
</annotation>

It seems to me that the one that I found is a latter edition "v3.0b2" as
opposed to "v2.1.2" but it's date, "2001-07" is earlier than the version that
you suggested, "2002-07".

I now wonder which one I should be using.?


John

> -----Original Message-----
> From: Sorin Ristache [mailto:sorin at ] 
> Sent: Wednesday, 11 August 2004 5:00 PM
> To: Hockaday John
> Cc: oXygen-user at 
> Subject: Re: [oXygen-user] Can't find xlinks when validating 
> a document
> 
> 
> The schema was developed by the OpenGIS Consortium:
> 
> http://schemas.opengis.net/gml/2.1.2/xlinks.xsd
> 
> Regards,
> Sorin
> 
> 
> John.Hockaday at  wrote:
> 
> > Hi,
> > 
> > I am trying to validate an xml record in which there are 
> lots of "import"
> > statements and "include" statements to various W3C XML 
> Schemas.  One of the
> > XML Schemas is xlinks.xsd.  The namespace is 
> http://www.w3.org/1999/xlink but
> > I can't seem to find the actual xlinks.xsd from this URI.
> > 
> > Does anyone know where xlinks.xsd is?
> > 
> > Thanks.
> > 
> > 
> > John Hockaday
> > Geoscience Australia
> > GPO Box 378
> > Canberra ACT 2601
> > (02) 6249 9735
> > http://www.ga.gov.au/ 
> > john.hockaday at 
> > 
> > _______________________________________________
> > oXygen-user mailing list
> > oXygen-user at 
> > http://www.oxygenxml.com/mailman/listinfo/oxygen-user
> 


From bogus@does.not.exist.com  Thu Aug 12 04:28:27 2004
From: bogus@does.not.exist.com (Sorin Ristache)
Date: Thu, 12 Aug 2004 12:28:27 +0300
Subject: [oXygen-user] Can't find xlinks when validating a document
In-Reply-To: <E97B4331B4C19943B69A80E15DE45C2601355561@mail1.agso.gov.au>
References: <E97B4331B4C19943B69A80E15DE45C2601355561@mail1.agso.gov.au>
Message-ID: <411B383B.1040902@sync.ro>

The xlinks.xsd that you found contains the comment

<!-- ==============================================================
Attributes grouped by XLink type, as specified in the W3C 
Proposed Recommendation (dated 2000-12-20)
============================================================== -->

while the xlinks.xsd that I suggested contains a comment

<!-- ==============================================================
Attributes grouped by XLink type, as specified by the allowed usage patterns 
in sec. 4.1 of the W3C Recommendation (dated 2001-06-27)
=================================================================== -->

I would use the version that I suggested (http://schemas.opengis.net/gml/2.1.2/xlinks.xsd).

Best regards,
Sorin

John.Hockaday at  wrote:

>Sorin,
>
>Thanks for that information but now I am really confused.  While I was
>waiting for a reply on this list I did manage to find a copy of xlinks.xsd
>with a GML3.1 specification.  The trouble is I don't know which one is the
>latest version.
>
>The application information held in the xlinks.xsd that you suggested is as
>follows:
>
><annotation>
>  <appinfo>xlinks.xsd v2.1.2 2002-07</appinfo> 
>  <documentation xml:lang="en">This schema provides the XLink attributes for
>general use.</documentation> 
>  </annotation>
>
>The application information held in the xlinks.xsd that I found is as
>follows:
>
><annotation>
>  <appinfo
>source="urn:opengis:specification:gml:schema-xlinks:v3.0c2">xlinks.xsd v3.0b2
>2001-07</appinfo>
>  <documentation>
>    GML 3.0 candidate xlinks schema. Copyright (c) 2001 OGC, All Rights
>Reserved.
>  </documentation>
></annotation>
>
>It seems to me that the one that I found is a latter edition "v3.0b2" as
>opposed to "v2.1.2" but it's date, "2001-07" is earlier than the version that
>you suggested, "2002-07".
>
>I now wonder which one I should be using.?
>
>
>John
>
>  
>
>>-----Original Message-----
>>From: Sorin Ristache [mailto:sorin at ] 
>>Sent: Wednesday, 11 August 2004 5:00 PM
>>To: Hockaday John
>>Cc: oXygen-user at 
>>Subject: Re: [oXygen-user] Can't find xlinks when validating 
>>a document
>>
>>
>>The schema was developed by the OpenGIS Consortium:
>>
>>http://schemas.opengis.net/gml/2.1.2/xlinks.xsd
>>
>>Regards,
>>Sorin
>>
>>
>>John.Hockaday at  wrote:
>>
>>    
>>
>>>Hi,
>>>
>>>I am trying to validate an xml record in which there are 
>>>      
>>>
>>lots of "import"
>>    
>>
>>>statements and "include" statements to various W3C XML 
>>>      
>>>
>>Schemas.  One of the
>>    
>>
>>>XML Schemas is xlinks.xsd.  The namespace is 
>>>      
>>>
>>http://www.w3.org/1999/xlink but
>>    
>>
>>>I can't seem to find the actual xlinks.xsd from this URI.
>>>
>>>Does anyone know where xlinks.xsd is?
>>>
>>>Thanks.
>>>
>>>
>>>John Hockaday
>>>Geoscience Australia
>>>GPO Box 378
>>>Canberra ACT 2601
>>>(02) 6249 9735
>>>http://www.ga.gov.au/ 
>>>john.hockaday at 
>>>
>>>_______________________________________________
>>>oXygen-user mailing list
>>>oXygen-user at 
>>>http://www.oxygenxml.com/mailman/listinfo/oxygen-user
>>>      
>>>

From bogus@does.not.exist.com  Fri Aug 13 02:10:25 2004
From: bogus@does.not.exist.com ()
Date: Fri, 13 Aug 2004 17:10:25 +1000
Subject: [oXygen-user] Some help please with interpreting error messages
Message-ID: <E97B4331B4C19943B69A80E15DE45C2601355565@mail1.agso.gov.au>

Hi All,

At the bottom of this email is an extract from an W3C XML Schema file.  When
I try to validate this XSD I get the following error:

"E src-resolve: Cannot resolve the name 'gml:AbstractGeometryType' to a(n)
'type definition' component."

The line to which this errors refers is:

"  <xs:element name="TM_Object" type="gml:AbstractTimeObjectType"/>"

I'm not quite sure what this error message means.  I have tried looking at
the relevant W3C XML Schema documentation but it doesn't make sense to me.  I
have looked at the temporal.xsd, which is the file referred to by the "gml"
namespace.  The relevant code looks like this:

"
  <complexType name="AbstractTimeObjectType" abstract="true">
    <annotation>
      <documentation xml:lang="en">
      The abstract supertype for temporal objects.
      </documentation>
    </annotation>
    <complexContent>
      <extension base="gml:AbstractGMLType"/>
    </complexContent>
  </complexType>
"

All I can think of is that the complexType name mentioned above should be
"gml:AbstractTimeObjectType" to make it relate to the "gml" namespace.

Can anyone tell me how I must change the code below to get rid of the error?

Thanks in advance for any help.



John


<?xml version="1.0" encoding="UTF-8"?>
<xs:schema targetNamespace="http://www.isotc211.org/stXML"
xmlns:stXML="http://www.isotc211.org/stXML"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:scXML="http://www.isotc211.org/scXML"
xmlns:gml="http://www.opengis.net/gml" version="0.1">
  <!-- ================================== Imports
================================== -->
  <xs:import namespace="http://www.opengis.net/gml"
schemaLocation="../../GML3.1/GML-3.1.0-Draft-Schemas/base/temporal.xsd"/>
  <xs:import namespace="http://www.isotc211.org/scXML"
schemaLocation="basicTypes.xsd"/>
  <!-- ================================== Classes
================================= -->
  <!--
........................................................................ -->
  <xs:element name="TM_Primitive" type="gml:AbstractTimePrimitiveType"
substitutionGroup="stXML:TM_Object"/>
  <!--
........................................................................ -->
  <xs:complexType name="TM_Primitive_PropertyType">
    <xs:sequence>
      <xs:element ref="gml:_TimePrimitive" minOccurs="0"/>
    </xs:sequence>
    <xs:attributeGroup ref="scXML:ObjectReference"/>
  </xs:complexType>
  <!--
===========================================================================
-->
  <!--
........................................................................ -->
  <xs:element name="TM_Object" type="gml:AbstractTimeObjectType"/>
  <!--
........................................................................ -->
  <xs:complexType name="TM_Object_PropertyType">
    <xs:sequence>
      <xs:element ref="gml:_TimeObject" minOccurs="0"/>
    </xs:sequence>
    <xs:attributeGroup ref="scXML:ObjectReference"/>
  </xs:complexType>



From bogus@does.not.exist.com  Sun Aug 15 14:05:23 2004
From: bogus@does.not.exist.com (T Reaves)
Date: Sun, 15 Aug 2004 15:05:23 -0400
Subject: [oXygen-user] Eclipse & color 
Message-ID: <0F3D71B5-EEEE-11D8-A889-000A95DF178E@silverfieldstech.com>

I can not seem to figure out how to not have the current line 
highlighted.  Would someone point out what I need to do to turn this 
off?

Thanks!


From bogus@does.not.exist.com  Sun Aug 15 14:06:51 2004
From: bogus@does.not.exist.com (T Reaves)
Date: Sun, 15 Aug 2004 15:06:51 -0400
Subject: [oXygen-user] [Feature Request] code formatting
Message-ID: <440C22FF-EEEE-11D8-A889-000A95DF178E@silverfieldstech.com>

I'd like to have a little more control over what happens when the XML 
is formatted.  Are there any plans to add this?  For example, I'd like 
to have a blank line before any comments.  Comments typically start a 
logical block, and having that line there helps to graphically define 
it.


From bogus@does.not.exist.com  Mon Aug 16 01:13:32 2004
From: bogus@does.not.exist.com (Mircea Enachescu)
Date: Mon, 16 Aug 2004 09:13:32 +0300
Subject: [oXygen-user] Eclipse & color
In-Reply-To: <0F3D71B5-EEEE-11D8-A889-000A95DF178E@silverfieldstech.com>
References: <0F3D71B5-EEEE-11D8-A889-000A95DF178E@silverfieldstech.com>
Message-ID: <4120508C.2000905@oxygenxml.com>

Hi,

You have to go to: Window / Preferences / Workbench / Editors / Text 
Editor / Highlight current line - and uncheck the option.

Best regards,
Mircea.

T Reaves wrote:

> I can not seem to figure out how to not have the current line 
> highlighted.  Would someone point out what I need to do to turn this off?
>
> Thanks!
>
> _______________________________________________
> oXygen-user mailing list
> oXygen-user at 
> http://www.oxygenxml.com/mailman/listinfo/oxygen-user


-- 
ing. Mircea Enachescu mailto:mircea at 
Phone   +40-251-461480  +40-251-406285
Fax     +40-251-461482
Mobile  +40-723-182335
Syncro Soft srl, Gilortului 9, Craiova, 200813-Romania
http://www.sync.ro  
<oXygen/> XML Editor - http://www.oxygenxml.com/



From bogus@does.not.exist.com  Mon Aug 16 03:01:21 2004
From: bogus@does.not.exist.com (Sorin Ristache)
Date: Mon, 16 Aug 2004 11:01:21 +0300
Subject: [oXygen-user] Some help please with interpreting error messages
In-Reply-To: <E97B4331B4C19943B69A80E15DE45C2601355565@mail1.agso.gov.au>
References: <E97B4331B4C19943B69A80E15DE45C2601355565@mail1.agso.gov.au>
Message-ID: <412069D1.3020208@oxygenxml.com>

Hello,

Can you send your version of the files basicTypes.xsd, temporal.xsd, 
gmlBase.xsd and xlinks.xsd and your complete XSD file that you are 
trying to validate ? If  I use the GML schema files from 
http://schemas.opengis.net/ I get a completely different set of 
validation errors. What <oXygen/> version are you using for validation ?

Best regards,
Sorin Ristache

http://www.oxygenxml.com/
Syncro Soft ltd.


John.Hockaday at  wrote:

>Hi All,
>
>At the bottom of this email is an extract from an W3C XML Schema file.  When
>I try to validate this XSD I get the following error:
>
>"E src-resolve: Cannot resolve the name 'gml:AbstractGeometryType' to a(n)
>'type definition' component."
>
>The line to which this errors refers is:
>
>"  <xs:element name="TM_Object" type="gml:AbstractTimeObjectType"/>"
>
>I'm not quite sure what this error message means.  I have tried looking at
>the relevant W3C XML Schema documentation but it doesn't make sense to me.  I
>have looked at the temporal.xsd, which is the file referred to by the "gml"
>namespace.  The relevant code looks like this:
>
>"
>  <complexType name="AbstractTimeObjectType" abstract="true">
>    <annotation>
>      <documentation xml:lang="en">
>      The abstract supertype for temporal objects.
>      </documentation>
>    </annotation>
>    <complexContent>
>      <extension base="gml:AbstractGMLType"/>
>    </complexContent>
>  </complexType>
>"
>
>All I can think of is that the complexType name mentioned above should be
>"gml:AbstractTimeObjectType" to make it relate to the "gml" namespace.
>
>Can anyone tell me how I must change the code below to get rid of the error?
>
>Thanks in advance for any help.
>
>
>
>John
>
>
><?xml version="1.0" encoding="UTF-8"?>
><xs:schema targetNamespace="http://www.isotc211.org/stXML"
>xmlns:stXML="http://www.isotc211.org/stXML"
>xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
>xmlns:xs="http://www.w3.org/2001/XMLSchema"
>xmlns:xlink="http://www.w3.org/1999/xlink"
>xmlns:scXML="http://www.isotc211.org/scXML"
>xmlns:gml="http://www.opengis.net/gml" version="0.1">
>  <!-- ================================== Imports
>================================== -->
>  <xs:import namespace="http://www.opengis.net/gml"
>schemaLocation="../../GML3.1/GML-3.1.0-Draft-Schemas/base/temporal.xsd"/>
>  <xs:import namespace="http://www.isotc211.org/scXML"
>schemaLocation="basicTypes.xsd"/>
>  <!-- ================================== Classes
>================================= -->
>  <!--
>........................................................................ -->
>  <xs:element name="TM_Primitive" type="gml:AbstractTimePrimitiveType"
>substitutionGroup="stXML:TM_Object"/>
>  <!--
>........................................................................ -->
>  <xs:complexType name="TM_Primitive_PropertyType">
>    <xs:sequence>
>      <xs:element ref="gml:_TimePrimitive" minOccurs="0"/>
>    </xs:sequence>
>    <xs:attributeGroup ref="scXML:ObjectReference"/>
>  </xs:complexType>
>  <!--
>===========================================================================
>-->
>  <!--
>........................................................................ -->
>  <xs:element name="TM_Object" type="gml:AbstractTimeObjectType"/>
>  <!--
>........................................................................ -->
>  <xs:complexType name="TM_Object_PropertyType">
>    <xs:sequence>
>      <xs:element ref="gml:_TimeObject" minOccurs="0"/>
>    </xs:sequence>
>    <xs:attributeGroup ref="scXML:ObjectReference"/>
>  </xs:complexType>
>
>
>_______________________________________________
>oXygen-user mailing list
>oXygen-user at 
>http://www.oxygenxml.com/mailman/listinfo/oxygen-user
>  
>

From bogus@does.not.exist.com  Mon Aug 16 07:30:27 2004
From: bogus@does.not.exist.com (Sorin Ristache)
Date: Mon, 16 Aug 2004 15:30:27 +0300
Subject: [oXygen-user] [Feature Request] code formatting
In-Reply-To: <440C22FF-EEEE-11D8-A889-000A95DF178E@silverfieldstech.com>
References: <440C22FF-EEEE-11D8-A889-000A95DF178E@silverfieldstech.com>
Message-ID: <4120A8E3.5040600@oxygenxml.com>

Hello,

You can achieve the same effect if you insert a blank line just after 
the start of the comment because <oXygen/> will preserve it.

Regards,
Sorin

T Reaves wrote:

> I'd like to have a little more control over what happens when the XML 
> is formatted.  Are there any plans to add this?  For example, I'd like 
> to have a blank line before any comments.  Comments typically start a 
> logical block, and having that line there helps to graphically define it.
>
> _______________________________________________
> oXygen-user mailing list
> oXygen-user at 
> http://www.oxygenxml.com/mailman/listinfo/oxygen-user


From bogus@does.not.exist.com  Mon Aug 16 18:30:49 2004
From: bogus@does.not.exist.com ()
Date: Tue, 17 Aug 2004 09:30:49 +1000
Subject: [oXygen-user] Some help please with interpreting error messages
Message-ID: <E97B4331B4C19943B69A80E15DE45C260135556A@mail1.agso.gov.au>

Sorin,

Thank you very much for replying to my email.  The XSDs that you ask for are
about 1MB so I have tarred and gzipped them into a file called
ISO19139GML.tar.gz.  I have loaded this file onto a test web site.  The URL
is:

http://www-test.ga.gov.au/asdd/work/ISO19139GML.tar.gz

If you can't access this file then I will send it directly to you rather than
fill up everyone's mailbox on this list.

The version of Oxygen that I am using is 3.1.  I have asked for our systems
administrators to load up version 4.2 and I expect that to happen within the
next day or two.  Maybe this will fix some of the validation errors.

Thanks again for replying to my email.


John

> -----Original Message-----
> From: Sorin Ristache [mailto:sorin at ] 
> Sent: Monday, 16 August 2004 6:01 PM
> To: Hockaday John
> Cc: oXygen-user at 
> Subject: Re: [oXygen-user] Some help please with interpreting 
> error messages
> 
> 
> Hello,
> 
> Can you send your version of the files basicTypes.xsd, temporal.xsd, 
> gmlBase.xsd and xlinks.xsd and your complete XSD file that you are 
> trying to validate ? If  I use the GML schema files from 
> http://schemas.opengis.net/ I get a completely different set of 
> validation errors. What <oXygen/> version are you using for 
> validation ?
> 
> Best regards,
> Sorin Ristache
> 
> http://www.oxygenxml.com/
> Syncro Soft ltd.
> 
> 
> John.Hockaday at  wrote:
> 
> >Hi All,
> >
> >At the bottom of this email is an extract from an W3C XML 
> Schema file.  When
> >I try to validate this XSD I get the following error:
> >
> >"E src-resolve: Cannot resolve the name 
> 'gml:AbstractGeometryType' to a(n)
> >'type definition' component."
> >
> >The line to which this errors refers is:
> >
> >"  <xs:element name="TM_Object" type="gml:AbstractTimeObjectType"/>"
> >
> >I'm not quite sure what this error message means.  I have 
> tried looking at
> >the relevant W3C XML Schema documentation but it doesn't 
> make sense to me.  I
> >have looked at the temporal.xsd, which is the file referred 
> to by the "gml"
> >namespace.  The relevant code looks like this:
> >
> >"
> >  <complexType name="AbstractTimeObjectType" abstract="true">
> >    <annotation>
> >      <documentation xml:lang="en">
> >      The abstract supertype for temporal objects.
> >      </documentation>
> >    </annotation>
> >    <complexContent>
> >      <extension base="gml:AbstractGMLType"/>
> >    </complexContent>
> >  </complexType>
> >"
> >
> >All I can think of is that the complexType name mentioned 
> above should be
> >"gml:AbstractTimeObjectType" to make it relate to the "gml" 
> namespace.
> >
> >Can anyone tell me how I must change the code below to get 
> rid of the error?
> >
> >Thanks in advance for any help.
> >
> >
> >
> >John
> >
> >
> ><?xml version="1.0" encoding="UTF-8"?>
> ><xs:schema targetNamespace="http://www.isotc211.org/stXML"
> >xmlns:stXML="http://www.isotc211.org/stXML"
> >xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
> >xmlns:xs="http://www.w3.org/2001/XMLSchema"
> >xmlns:xlink="http://www.w3.org/1999/xlink"
> >xmlns:scXML="http://www.isotc211.org/scXML"
> >xmlns:gml="http://www.opengis.net/gml" version="0.1">
> >  <!-- ================================== Imports
> >================================== -->
> >  <xs:import namespace="http://www.opengis.net/gml"
> >schemaLocation="../../GML3.1/GML-3.1.0-Draft-Schemas/base/tem
> poral.xsd"/>
> >  <xs:import namespace="http://www.isotc211.org/scXML"
> >schemaLocation="basicTypes.xsd"/>
> >  <!-- ================================== Classes
> >================================= -->
> >  <!--
> >.............................................................
> ........... -->
> >  <xs:element name="TM_Primitive" 
> type="gml:AbstractTimePrimitiveType"
> >substitutionGroup="stXML:TM_Object"/>
> >  <!--
> >.............................................................
> ........... -->
> >  <xs:complexType name="TM_Primitive_PropertyType">
> >    <xs:sequence>
> >      <xs:element ref="gml:_TimePrimitive" minOccurs="0"/>
> >    </xs:sequence>
> >    <xs:attributeGroup ref="scXML:ObjectReference"/>
> >  </xs:complexType>
> >  <!--
> >=============================================================
> ==============
> >-->
> >  <!--
> >.............................................................
> ........... -->
> >  <xs:element name="TM_Object" type="gml:AbstractTimeObjectType"/>
> >  <!--
> >.............................................................
> ........... -->
> >  <xs:complexType name="TM_Object_PropertyType">
> >    <xs:sequence>
> >      <xs:element ref="gml:_TimeObject" minOccurs="0"/>
> >    </xs:sequence>
> >    <xs:attributeGroup ref="scXML:ObjectReference"/>
> >  </xs:complexType>
> >
> >
> >_______________________________________________
> >oXygen-user mailing list
> >oXygen-user at 
> >http://www.oxygenxml.com/mailman/listinfo/oxygen-user
> >  
> >
> 


From bogus@does.not.exist.com  Mon Aug 16 21:34:43 2004
From: bogus@does.not.exist.com (T Reaves)
Date: Mon, 16 Aug 2004 22:34:43 -0400
Subject: [oXygen-user] [Feature Request] code formatting
In-Reply-To: <4120A8E3.5040600@oxygenxml.com>
References: <440C22FF-EEEE-11D8-A889-000A95DF178E@silverfieldstech.com>
	<4120A8E3.5040600@oxygenxml.com>
Message-ID: <FF1D961D-EFF5-11D8-BFDC-000A95DF178E@silverfieldstech.com>

Fraid not.  Oxygen is removing EVERY blank line.


On Aug 16, 2004, at 8:30 AM, Sorin Ristache wrote:

> Hello,
>
> You can achieve the same effect if you insert a blank line just after 
> the start of the comment because <oXygen/> will preserve it.
>
> Regards,
> Sorin
>
> T Reaves wrote:
>
>> I'd like to have a little more control over what happens when the XML 
>> is formatted.  Are there any plans to add this?  For example, I'd 
>> like to have a blank line before any comments.  Comments typically 
>> start a logical block, and having that line there helps to 
>> graphically define it.


From bogus@does.not.exist.com  Tue Aug 17 01:37:45 2004
From: bogus@does.not.exist.com (Sorin Ristache)
Date: Tue, 17 Aug 2004 09:37:45 +0300
Subject: [oXygen-user] [Feature Request] code formatting
In-Reply-To: <FF1D961D-EFF5-11D8-BFDC-000A95DF178E@silverfieldstech.com>
References: <440C22FF-EEEE-11D8-A889-000A95DF178E@silverfieldstech.com>
	<4120A8E3.5040600@oxygenxml.com>
	<FF1D961D-EFF5-11D8-BFDC-000A95DF178E@silverfieldstech.com>
Message-ID: <4121A7B9.5090409@oxygenxml.com>

<oXygen/> preserves the content of XML comments when the user applies 
the "Format and indent" function. It also preserves the white space 
inside the XML elements that you specify in the "Preserve space 
elements" list (Options -> Preferences -> Editor / Format). Try 
inserting the comment

      <!--
  
       
              Start of new logical block.
      -->

in your document and apply "Format and indent". The two blank lines will 
remain untouched.

Hope that helps,
Sorin

T Reaves wrote:

> Fraid not.  Oxygen is removing EVERY blank line.
>
>
> On Aug 16, 2004, at 8:30 AM, Sorin Ristache wrote:
>
>> Hello,
>>
>> You can achieve the same effect if you insert a blank line just after 
>> the start of the comment because <oXygen/> will preserve it.
>>
>> Regards,
>> Sorin
>>
>> T Reaves wrote:
>>
>>> I'd like to have a little more control over what happens when the 
>>> XML is formatted.  Are there any plans to add this?  For example, 
>>> I'd like to have a blank line before any comments.  Comments 
>>> typically start a logical block, and having that line there helps to 
>>> graphically define it.
>>
>
> _______________________________________________
> oXygen-user mailing list
> oXygen-user at 
> http://www.oxygenxml.com/mailman/listinfo/oxygen-user


From bogus@does.not.exist.com  Tue Aug 17 04:29:04 2004
From: bogus@does.not.exist.com (Sean Wheller)
Date: Tue, 17 Aug 2004 11:29:04 +0200
Subject: [oXygen-user] attrib polulation on DTDless document
Message-ID: <200408171129.04488.sean@enbaya.co.za>

I notice when the DocDecl is commented that the docbook xref element is 
inserted as
<xref></xref> instead of <xref/>

Then I notice when inserting an attribute the inline completion mode is auto 
populated with the values of all other attributes of that type in the current 
document.

This is a great feature, I never saw it before, it save soooo much time. Now 
why does it not work when the DocDecl is uncommented?
-- 
Sean Wheller
sean at 
http://www.enbaya.co.za

From bogus@does.not.exist.com  Tue Aug 17 05:03:19 2004
From: bogus@does.not.exist.com (George Cristian Bina)
Date: Tue, 17 Aug 2004 13:03:19 +0300
Subject: [oXygen-user] attrib polulation on DTDless document
References: <200408171129.04488.sean@enbaya.co.za>
Message-ID: <00ee01c48441$6d132b50$1300000a@spelling>

Hi Sean,

Oxygen will perform automatically a learn structure action when you open a
document and use that to guide the editing if a DTD or a schema is not
specified.

> I notice when the DocDecl is commented that the docbook xref element is
> inserted as
> <xref></xref> instead of <xref/>

That is because xref is declared as EMPTY in the DTD. The learn structure
action generates a more relaxed model it will consider the xref element
model as (#PCDATA), thus the <xref></xref> after content completion.

> Then I notice when inserting an attribute the inline completion mode is
auto
> populated with the values of all other attributes of that type in the
current
> document.

Yes, on learn structure the attribute values are also presented.

> This is a great feature, I never saw it before, it save soooo much time.
Now
> why does it not work when the DocDecl is uncommented?

You can switch between the DTD and the learned structure using the validate
and learn structure actions.

Best Regards,
George
-------------------------------------------------------------
George Cristian Bina mailto:george at 
<oXygen/> XML Editor - http://www.oxygenxml.com/




From bogus@does.not.exist.com  Tue Aug 17 05:30:54 2004
From: bogus@does.not.exist.com (Sean Wheller)
Date: Tue, 17 Aug 2004 12:30:54 +0200
Subject: [oXygen-user] attrib polulation on DTDless document
In-Reply-To: <00ee01c48441$6d132b50$1300000a@spelling>
References: <200408171129.04488.sean@enbaya.co.za>
	<00ee01c48441$6d132b50$1300000a@spelling>
Message-ID: <200408171230.54984.sean@enbaya.co.za>

On Tuesday 17 August 2004 12:03, George Cristian Bina wrote:
> You can switch between the DTD and the learned structure using the validate
> and learn structure actions.

Yes, I noticed this has some effect. But when the DTD is specified oxy inserts 
with strict adherence to the DTD. So in the case of xref, it will use <xref/>

When inserting attributes it will prompt with autocompletion on on the 
attributes specified for that element within the dtd and when no values are 
defined will leave it blank (so auto completion stops). Using the learn 
feature does not change this position. Unless I am doing something wrong. 
Which is most likely cause I am tired:-)

But Geee Wizz is that could happen by default on all documents it would be a 
super feature:-)
-- 
Sean Wheller
sean at 
http://www.enbaya.co.za

From bogus@does.not.exist.com  Tue Aug 17 05:50:04 2004
From: bogus@does.not.exist.com (George Cristian Bina)
Date: Tue, 17 Aug 2004 13:50:04 +0300
Subject: [oXygen-user] attrib polulation on DTDless document
References: <200408171129.04488.sean@enbaya.co.za>
	<00ee01c48441$6d132b50$1300000a@spelling>
	<200408171230.54984.sean@enbaya.co.za>
Message-ID: <011001c48447$f77682a0$1300000a@spelling>

Hi Sean,

> When inserting attributes it will prompt with autocompletion on on the
> attributes specified for that element within the dtd and when no values
are
> defined will leave it blank (so auto completion stops). Using the learn
> feature does not change this position. Unless I am doing something wrong.
> Which is most likely cause I am tired:-)

After a learn structure operation oXygen will use the document structure to
guide the content completion irrespective of the DTD declaration and if you
have values for that attribute you should be able to insert them through the
content completion popup. You can also check the Model View that should show
the current model.
If you still have problems a cut down sample will help.

Best Regards,
George
-------------------------------------------------------------
George Cristian Bina mailto:george at 
<oXygen/> XML Editor - http://www.oxygenxml.com/


From bogus@does.not.exist.com  Tue Aug 17 05:59:52 2004
From: bogus@does.not.exist.com (George Cristian Bina)
Date: Tue, 17 Aug 2004 13:59:52 +0300
Subject: [oXygen-user] plug-in
References: 
	<200408092050.37914.sean@enbaya.co.za><411868A3.1000800@oxygenxml.com>
	<200408100854.59154.sean@enbaya.co.za>
Message-ID: <014101c48449$539e7870$1300000a@spelling>

Hi Sean,

The plugin support in the standalone version of oXygen is rather limited. It
was developed upon user requests. You can find more information at:
http://www.oxygenxml.com/plugins.html
http://www.oxygenxml.com/plugins/plugins.zip
http://www.oxygenxml.com/plugins/plugins.pdf

All the best,
George
-------------------------------------------------------------
George Cristian Bina mailto:george at 
<oXygen/> XML Editor - http://www.oxygenxml.com/


----- Original Message -----
From: "Sean Wheller" <sean at >
To: "Dan Caprioara" <dan at >
Cc: <oxygen-user at >
Sent: Tuesday, August 10, 2004 9:54 AM
Subject: Re: [oXygen-user] plug-in


> On Tuesday 10 August 2004 08:18, Dan Caprioara wrote:
> > The class attributes from the plugin.xml are specifying the Java
> > class from the plugin jar that implements the Oxygen Plugin interface.
>
> Where does one find more information about the Oxygen Plugin interface so
that
> JSVN can be modified to support plugin to Oxygen?
> --
> Sean Wheller
> sean at 
> http://www.enbaya.co.za
> _______________________________________________
> oXygen-user mailing list
> oXygen-user at 
> http://www.oxygenxml.com/mailman/listinfo/oxygen-user
>


From bogus@does.not.exist.com  Tue Aug 17 06:06:17 2004
From: bogus@does.not.exist.com (Sean Wheller)
Date: Tue, 17 Aug 2004 13:06:17 +0200
Subject: [oXygen-user] attrib polulation on DTDless document
In-Reply-To: <011001c48447$f77682a0$1300000a@spelling>
References: <200408171129.04488.sean@enbaya.co.za>
	<200408171230.54984.sean@enbaya.co.za>
	<011001c48447$f77682a0$1300000a@spelling>
Message-ID: <200408171306.17482.sean@enbaya.co.za>

On Tuesday 17 August 2004 12:50, George Cristian Bina wrote:
> After a learn structure operation oXygen will use the document structure to
> guide the content completion irrespective of the DTD declaration and if you
> have values for that attribute you should be able to insert them through
> the content completion popup. You can also check the Model View that should
> show the current model.
> If you still have problems a cut down sample will help.

Yahoo!. I got it working. So cool :P
-- 
Sean Wheller
sean at 
http://www.enbaya.co.za

From bogus@does.not.exist.com  Tue Aug 17 10:48:44 2004
From: bogus@does.not.exist.com (George Cristian Bina)
Date: Tue, 17 Aug 2004 18:48:44 +0300
Subject: [oXygen-user] Some help please with interpreting error messages
References: <E97B4331B4C19943B69A80E15DE45C260135556A@mail1.agso.gov.au>
Message-ID: <03e201c48471$af331d30$1300000a@spelling>

Dear John,

The error message means that there is no declaration for that type in the
included/imported schemas.

You should add change the
<include schemaLocation="gmlBase.xsd"/>
to
<include
schemaLocation="../../GML3.1/GML-3.1.0-Draft-Schemas/base/gmlBase.xsd"/>
in your ISO19139/2004-08-11/temporal.xsd file.

Also you need to import the XLink schema in your
ISO19139/2004-08-11/basicTypes.xsd file.

<xs:import namespace="http://www.w3.org/1999/xlink"
schemaLocation="xlinks.xsd"/>

Then the following document should be reported valid (with schema full
checking feature disabled):

<?xml version="1.0" encoding="UTF-8"?>
<xs:schema targetNamespace="http://www.isotc211.org/stXML"
xmlns:stXML="http://www.isotc211.org/stXML"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:scXML="http://www.isotc211.org/scXML"
xmlns:gml="http://www.opengis.net/gml" version="0.1">
  <!-- ================================== Imports
================================== -->
  <xs:import namespace="http://www.opengis.net/gml"
schemaLocation="ISO19139/2004-08-11/temporal.xsd"/>
  <xs:import namespace="http://www.isotc211.org/scXML"
schemaLocation="ISO19139/2004-08-11/basicTypes.xsd"/>
  <!-- ================================== Classes
================================= -->
  <!--
........................................................................ -->
  <xs:element name="TM_Primitive" type="gml:AbstractTimePrimitiveType"
substitutionGroup="stXML:TM_Object"/>
  <!--
........................................................................ -->
  <xs:complexType name="TM_Primitive_PropertyType">
    <xs:sequence>
      <xs:element ref="gml:_TimePrimitive" minOccurs="0"/>
    </xs:sequence>
    <xs:attributeGroup ref="scXML:ObjectReference"/>
  </xs:complexType>
  <!--
===========================================================================
-->
  <!--
........................................................................ -->
  <xs:element name="TM_Object" type="gml:AbstractTimeObjectType"/>
  <!--
........................................................................ -->
  <xs:complexType name="TM_Object_PropertyType">
    <xs:sequence>
      <xs:element ref="gml:_TimeObject" minOccurs="0"/>
    </xs:sequence>
    <xs:attributeGroup ref="scXML:ObjectReference"/>
  </xs:complexType>
</xs:schema>

Hope that helps,
George
-------------------------------------------------------------
George Cristian Bina mailto:george at 
<oXygen/> XML Editor - http://www.oxygenxml.com/


----- Original Message -----
From: <John.Hockaday at >
To: <oXygen-user at >
Sent: Tuesday, August 17, 2004 2:30 AM
Subject: RE: [oXygen-user] Some help please with interpreting error messages


> Sorin,
>
> Thank you very much for replying to my email.  The XSDs that you ask for
are
> about 1MB so I have tarred and gzipped them into a file called
> ISO19139GML.tar.gz.  I have loaded this file onto a test web site.  The
URL
> is:
>
> http://www-test.ga.gov.au/asdd/work/ISO19139GML.tar.gz
>
> If you can't access this file then I will send it directly to you rather
than
> fill up everyone's mailbox on this list.
>
> The version of Oxygen that I am using is 3.1.  I have asked for our
systems
> administrators to load up version 4.2 and I expect that to happen within
the
> next day or two.  Maybe this will fix some of the validation errors.
>
> Thanks again for replying to my email.
>
>
> John
>
> > -----Original Message-----
> > From: Sorin Ristache [mailto:sorin at ]
> > Sent: Monday, 16 August 2004 6:01 PM
> > To: Hockaday John
> > Cc: oXygen-user at 
> > Subject: Re: [oXygen-user] Some help please with interpreting
> > error messages
> >
> >
> > Hello,
> >
> > Can you send your version of the files basicTypes.xsd, temporal.xsd,
> > gmlBase.xsd and xlinks.xsd and your complete XSD file that you are
> > trying to validate ? If  I use the GML schema files from
> > http://schemas.opengis.net/ I get a completely different set of
> > validation errors. What <oXygen/> version are you using for
> > validation ?
> >
> > Best regards,
> > Sorin Ristache
> >
> > http://www.oxygenxml.com/
> > Syncro Soft ltd.
> >
> >
> > John.Hockaday at  wrote:
> >
> > >Hi All,
> > >
> > >At the bottom of this email is an extract from an W3C XML
> > Schema file.  When
> > >I try to validate this XSD I get the following error:
> > >
> > >"E src-resolve: Cannot resolve the name
> > 'gml:AbstractGeometryType' to a(n)
> > >'type definition' component."
> > >
> > >The line to which this errors refers is:
> > >
> > >"  <xs:element name="TM_Object" type="gml:AbstractTimeObjectType"/>"
> > >
> > >I'm not quite sure what this error message means.  I have
> > tried looking at
> > >the relevant W3C XML Schema documentation but it doesn't
> > make sense to me.  I
> > >have looked at the temporal.xsd, which is the file referred
> > to by the "gml"
> > >namespace.  The relevant code looks like this:
> > >
> > >"
> > >  <complexType name="AbstractTimeObjectType" abstract="true">
> > >    <annotation>
> > >      <documentation xml:lang="en">
> > >      The abstract supertype for temporal objects.
> > >      </documentation>
> > >    </annotation>
> > >    <complexContent>
> > >      <extension base="gml:AbstractGMLType"/>
> > >    </complexContent>
> > >  </complexType>
> > >"
> > >
> > >All I can think of is that the complexType name mentioned
> > above should be
> > >"gml:AbstractTimeObjectType" to make it relate to the "gml"
> > namespace.
> > >
> > >Can anyone tell me how I must change the code below to get
> > rid of the error?
> > >
> > >Thanks in advance for any help.
> > >
> > >
> > >
> > >John
> > >
> > >
> > ><?xml version="1.0" encoding="UTF-8"?>
> > ><xs:schema targetNamespace="http://www.isotc211.org/stXML"
> > >xmlns:stXML="http://www.isotc211.org/stXML"
> > >xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
> > >xmlns:xs="http://www.w3.org/2001/XMLSchema"
> > >xmlns:xlink="http://www.w3.org/1999/xlink"
> > >xmlns:scXML="http://www.isotc211.org/scXML"
> > >xmlns:gml="http://www.opengis.net/gml" version="0.1">
> > >  <!-- ================================== Imports
> > >================================== -->
> > >  <xs:import namespace="http://www.opengis.net/gml"
> > >schemaLocation="../../GML3.1/GML-3.1.0-Draft-Schemas/base/tem
> > poral.xsd"/>
> > >  <xs:import namespace="http://www.isotc211.org/scXML"
> > >schemaLocation="basicTypes.xsd"/>
> > >  <!-- ================================== Classes
> > >================================= -->
> > >  <!--
> > >.............................................................
> > ........... -->
> > >  <xs:element name="TM_Primitive"
> > type="gml:AbstractTimePrimitiveType"
> > >substitutionGroup="stXML:TM_Object"/>
> > >  <!--
> > >.............................................................
> > ........... -->
> > >  <xs:complexType name="TM_Primitive_PropertyType">
> > >    <xs:sequence>
> > >      <xs:element ref="gml:_TimePrimitive" minOccurs="0"/>
> > >    </xs:sequence>
> > >    <xs:attributeGroup ref="scXML:ObjectReference"/>
> > >  </xs:complexType>
> > >  <!--
> > >=============================================================
> > ==============
> > >-->
> > >  <!--
> > >.............................................................
> > ........... -->
> > >  <xs:element name="TM_Object" type="gml:AbstractTimeObjectType"/>
> > >  <!--
> > >.............................................................
> > ........... -->
> > >  <xs:complexType name="TM_Object_PropertyType">
> > >    <xs:sequence>
> > >      <xs:element ref="gml:_TimeObject" minOccurs="0"/>
> > >    </xs:sequence>
> > >    <xs:attributeGroup ref="scXML:ObjectReference"/>
> > >  </xs:complexType>
> > >
> > >
> > >_______________________________________________
> > >oXygen-user mailing list
> > >oXygen-user at 
> > >http://www.oxygenxml.com/mailman/listinfo/oxygen-user
> > >
> > >
> >
>
> _______________________________________________
> oXygen-user mailing list
> oXygen-user at 
> http://www.oxygenxml.com/mailman/listinfo/oxygen-user
>


From bogus@does.not.exist.com  Wed Aug 18 22:49:11 2004
From: bogus@does.not.exist.com ()
Date: Thu, 19 Aug 2004 13:49:11 +1000
Subject: [oXygen-user] Some help please with interpreting error messages
Message-ID: <E97B4331B4C19943B69A80E15DE45C2601355571@mail1.agso.gov.au>

George,

Thank you so much for your response.  I made the changes as you suggested and
it fixed the errors that I reported in my email.  Unfortunately, I have other
errors which I will try to resolve before I consult this very good list.

Your mention of the "schema-full-checking" switch allowed me to show all of
the GML XML Schemas validated.  Previously there were multitude validation
errors before I switched off the "schema-full-checking".  I tried looking up
"schema-full-checking" in the Oxygen documentation but there wasn't enough
for me to understand what it is.  

Can anyone point me to some documentation that explains what the
"schema-full-checking" is?  If not can someone explain to me, in simple
terms, what it means?  It seems to me that there are different levels of XML
Schema validation but I'm not quite sure.  If there are different validation
levels what are the consequences of each level?

Thanks in advance for any reply.


John

> -----Original Message-----
> From: George Cristian Bina [mailto:george at ] 
> Sent: Wednesday, 18 August 2004 1:49 AM
> To: Hockaday John; oXygen-user at 
> Subject: Re: [oXygen-user] Some help please with interpreting 
> error messages
> 
> 
> Dear John,
> 
> The error message means that there is no declaration for that 
> type in the
> included/imported schemas.
> 
> You should add change the
> <include schemaLocation="gmlBase.xsd"/>
> to
> <include
> schemaLocation="../../GML3.1/GML-3.1.0-Draft-Schemas/base/gmlB
> ase.xsd"/>
> in your ISO19139/2004-08-11/temporal.xsd file.
> 
> Also you need to import the XLink schema in your
> ISO19139/2004-08-11/basicTypes.xsd file.
> 
> <xs:import namespace="http://www.w3.org/1999/xlink"
> schemaLocation="xlinks.xsd"/>
> 
> Then the following document should be reported valid (with schema full
> checking feature disabled):
> 
> <?xml version="1.0" encoding="UTF-8"?>
> <xs:schema targetNamespace="http://www.isotc211.org/stXML"
> xmlns:stXML="http://www.isotc211.org/stXML"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
> xmlns:xs="http://www.w3.org/2001/XMLSchema"
> xmlns:xlink="http://www.w3.org/1999/xlink"
> xmlns:scXML="http://www.isotc211.org/scXML"
> xmlns:gml="http://www.opengis.net/gml" version="0.1">
>   <!-- ================================== Imports
> ================================== -->
>   <xs:import namespace="http://www.opengis.net/gml"
> schemaLocation="ISO19139/2004-08-11/temporal.xsd"/>
>   <xs:import namespace="http://www.isotc211.org/scXML"
> schemaLocation="ISO19139/2004-08-11/basicTypes.xsd"/>
>   <!-- ================================== Classes
> ================================= -->
>   <!--
> ..............................................................
> .......... -->
>   <xs:element name="TM_Primitive" type="gml:AbstractTimePrimitiveType"
> substitutionGroup="stXML:TM_Object"/>
>   <!--
> ..............................................................
> .......... -->
>   <xs:complexType name="TM_Primitive_PropertyType">
>     <xs:sequence>
>       <xs:element ref="gml:_TimePrimitive" minOccurs="0"/>
>     </xs:sequence>
>     <xs:attributeGroup ref="scXML:ObjectReference"/>
>   </xs:complexType>
>   <!--
> ==============================================================
> =============
> -->
>   <!--
> ..............................................................
> .......... -->
>   <xs:element name="TM_Object" type="gml:AbstractTimeObjectType"/>
>   <!--
> ..............................................................
> .......... -->
>   <xs:complexType name="TM_Object_PropertyType">
>     <xs:sequence>
>       <xs:element ref="gml:_TimeObject" minOccurs="0"/>
>     </xs:sequence>
>     <xs:attributeGroup ref="scXML:ObjectReference"/>
>   </xs:complexType>
> </xs:schema>
> 
> Hope that helps,
> George
> -------------------------------------------------------------
> George Cristian Bina mailto:george at 
> <oXygen/> XML Editor - http://www.oxygenxml.com/
> 
> 
> ----- Original Message -----
> From: <John.Hockaday at >
> To: <oXygen-user at >
> Sent: Tuesday, August 17, 2004 2:30 AM
> Subject: RE: [oXygen-user] Some help please with interpreting 
> error messages
> 
> 
> > Sorin,
> >
> > Thank you very much for replying to my email.  The XSDs 
> that you ask for
> are
> > about 1MB so I have tarred and gzipped them into a file called
> > ISO19139GML.tar.gz.  I have loaded this file onto a test 
> web site.  The
> URL
> > is:
> >
> > http://www-test.ga.gov.au/asdd/work/ISO19139GML.tar.gz
> >
> > If you can't access this file then I will send it directly 
> to you rather
> than
> > fill up everyone's mailbox on this list.
> >
> > The version of Oxygen that I am using is 3.1.  I have asked for our
> systems
> > administrators to load up version 4.2 and I expect that to 
> happen within
> the
> > next day or two.  Maybe this will fix some of the validation errors.
> >
> > Thanks again for replying to my email.
> >
> >
> > John
> >
> > > -----Original Message-----
> > > From: Sorin Ristache [mailto:sorin at ]
> > > Sent: Monday, 16 August 2004 6:01 PM
> > > To: Hockaday John
> > > Cc: oXygen-user at 
> > > Subject: Re: [oXygen-user] Some help please with interpreting
> > > error messages
> > >
> > >
> > > Hello,
> > >
> > > Can you send your version of the files basicTypes.xsd, 
> temporal.xsd,
> > > gmlBase.xsd and xlinks.xsd and your complete XSD file that you are
> > > trying to validate ? If  I use the GML schema files from
> > > http://schemas.opengis.net/ I get a completely different set of
> > > validation errors. What <oXygen/> version are you using for
> > > validation ?
> > >
> > > Best regards,
> > > Sorin Ristache
> > >
> > > http://www.oxygenxml.com/
> > > Syncro Soft ltd.
> > >
> > >
> > > John.Hockaday at  wrote:
> > >
> > > >Hi All,
> > > >
> > > >At the bottom of this email is an extract from an W3C XML
> > > Schema file.  When
> > > >I try to validate this XSD I get the following error:
> > > >
> > > >"E src-resolve: Cannot resolve the name
> > > 'gml:AbstractGeometryType' to a(n)
> > > >'type definition' component."
> > > >
> > > >The line to which this errors refers is:
> > > >
> > > >"  <xs:element name="TM_Object" 
> type="gml:AbstractTimeObjectType"/>"
> > > >
> > > >I'm not quite sure what this error message means.  I have
> > > tried looking at
> > > >the relevant W3C XML Schema documentation but it doesn't
> > > make sense to me.  I
> > > >have looked at the temporal.xsd, which is the file referred
> > > to by the "gml"
> > > >namespace.  The relevant code looks like this:
> > > >
> > > >"
> > > >  <complexType name="AbstractTimeObjectType" abstract="true">
> > > >    <annotation>
> > > >      <documentation xml:lang="en">
> > > >      The abstract supertype for temporal objects.
> > > >      </documentation>
> > > >    </annotation>
> > > >    <complexContent>
> > > >      <extension base="gml:AbstractGMLType"/>
> > > >    </complexContent>
> > > >  </complexType>
> > > >"
> > > >
> > > >All I can think of is that the complexType name mentioned
> > > above should be
> > > >"gml:AbstractTimeObjectType" to make it relate to the "gml"
> > > namespace.
> > > >
> > > >Can anyone tell me how I must change the code below to get
> > > rid of the error?
> > > >
> > > >Thanks in advance for any help.
> > > >
> > > >
> > > >
> > > >John
> > > >
> > > >
> > > ><?xml version="1.0" encoding="UTF-8"?>
> > > ><xs:schema targetNamespace="http://www.isotc211.org/stXML"
> > > >xmlns:stXML="http://www.isotc211.org/stXML"
> > > >xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
> > > >xmlns:xs="http://www.w3.org/2001/XMLSchema"
> > > >xmlns:xlink="http://www.w3.org/1999/xlink"
> > > >xmlns:scXML="http://www.isotc211.org/scXML"
> > > >xmlns:gml="http://www.opengis.net/gml" version="0.1">
> > > >  <!-- ================================== Imports
> > > >================================== -->
> > > >  <xs:import namespace="http://www.opengis.net/gml"
> > > >schemaLocation="../../GML3.1/GML-3.1.0-Draft-Schemas/base/tem
> > > poral.xsd"/>
> > > >  <xs:import namespace="http://www.isotc211.org/scXML"
> > > >schemaLocation="basicTypes.xsd"/>
> > > >  <!-- ================================== Classes
> > > >================================= -->
> > > >  <!--
> > > >.............................................................
> > > ........... -->
> > > >  <xs:element name="TM_Primitive"
> > > type="gml:AbstractTimePrimitiveType"
> > > >substitutionGroup="stXML:TM_Object"/>
> > > >  <!--
> > > >.............................................................
> > > ........... -->
> > > >  <xs:complexType name="TM_Primitive_PropertyType">
> > > >    <xs:sequence>
> > > >      <xs:element ref="gml:_TimePrimitive" minOccurs="0"/>
> > > >    </xs:sequence>
> > > >    <xs:attributeGroup ref="scXML:ObjectReference"/>
> > > >  </xs:complexType>
> > > >  <!--
> > > >=============================================================
> > > ==============
> > > >-->
> > > >  <!--
> > > >.............................................................
> > > ........... -->
> > > >  <xs:element name="TM_Object" 
> type="gml:AbstractTimeObjectType"/>
> > > >  <!--
> > > >.............................................................
> > > ........... -->
> > > >  <xs:complexType name="TM_Object_PropertyType">
> > > >    <xs:sequence>
> > > >      <xs:element ref="gml:_TimeObject" minOccurs="0"/>
> > > >    </xs:sequence>
> > > >    <xs:attributeGroup ref="scXML:ObjectReference"/>
> > > >  </xs:complexType>
> > > >
> > > >
> > > >_______________________________________________
> > > >oXygen-user mailing list
> > > >oXygen-user at 
> > > >http://www.oxygenxml.com/mailman/listinfo/oxygen-user
> > > >
> > > >
> > >
> >
> > _______________________________________________
> > oXygen-user mailing list
> > oXygen-user at 
> > http://www.oxygenxml.com/mailman/listinfo/oxygen-user
> >
> 
> 


From bogus@does.not.exist.com  Thu Aug 19 06:40:18 2004
From: bogus@does.not.exist.com (George Cristian Bina)
Date: Thu, 19 Aug 2004 14:40:18 +0300
Subject: [oXygen-user] Some help please with interpreting error messages
References: <E97B4331B4C19943B69A80E15DE45C2601355571@mail1.agso.gov.au>
Message-ID: <01b301c485e1$4f81a9d0$1300000a@spelling>

Hi John,

> Can anyone point me to some documentation that explains what the
> "schema-full-checking" is?  If not can someone explain to me, in simple
> terms, what it means?  It seems to me that there are different levels of
XML
> Schema validation but I'm not quite sure.  If there are different
validation
> levels what are the consequences of each level?

You can find more information following the link below [1], look for the
[http://apache.org/xml/features/validation/schema-full-checking] feature.

In simple words this means that the ambiguities [2] in schemas and
derivations by restriction [3] will not be checked.

[1] http://xml.apache.org/xerces2-j/features.html
[2] http://www.w3.org/TR/xmlschema-1/#cos-nonambig
[3] http://www.w3.org/TR/xmlschema-1/#cos-particle-restrict

Best Regards,
George
-------------------------------------------------------------
George Cristian Bina mailto:george at 
<oXygen/> XML Editor - http://www.oxygenxml.com/


From bogus@does.not.exist.com  Mon Aug 23 04:24:00 2004
From: bogus@does.not.exist.com (Sean Wheller)
Date: Mon, 23 Aug 2004 11:24:00 +0200
Subject: [oXygen-user] XInclude and Entities
Message-ID: <200408231124.00185.sean@enbaya.co.za>

Hi,

A document with the following DocDecl

<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
                      "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [
<!ENTITY % xinclude SYSTEM "/home/sean/apps/oxygen/docbook/dtd/xinclude.mod">
%xinclude;
<!ENTITY % global_entities SYSTEM "global.ent">
%global_entities;
]>

With XIncludes that use Entities provided by gobal.net

<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" 
href="&prt02_supplychain;">
		<xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude">
			<para>
				<emphasis>FIXME: MISSING XINCLUDE CONTENT</emphasis>
			</para>
		</xi:fallback>
	</xi:include>

I get an error, but to best of my knowledge the value of an attribute is 
allowed to be an entity

F The external entity reference "&prt02_supplychain;" is not permitted in an 
attribute value.

Any ideas where the problem is?

-- 
Sean Wheller
084-8549408
sean at 
http://www.enbaya.co.za

From bogus@does.not.exist.com  Wed Aug 18 03:37:18 2004
From: bogus@does.not.exist.com (Perez Carmona, David)
Date: Wed, 18 Aug 2004 10:37:18 +0200
Subject: [oXygen-user] Big files
Message-ID: <CA47BB2706D4CE4497C233DB9FCDB571406422@blconexc1.sg.gr.fcc.es>


Hi,

What about the support with large XML files?
I've tried to open a 10 Mb file with Oxygen and Eclipse has died.  I give 210 Mb to Eclipse, and have 1 Gb of RAM.
Any hint to improve this behavior?

David


*************************************************************
Este correo ha sido procesado por el Antivirus del Grupo FCC
*************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.oxygenxml.com/pipermail/oxygen-user/attachments/20040818/57e2768f/attachment.html 

From bogus@does.not.exist.com  Mon Aug 23 04:52:11 2004
From: bogus@does.not.exist.com (George Cristian Bina)
Date: Mon, 23 Aug 2004 12:52:11 +0300
Subject: [oXygen-user] XInclude and Entities
References: <200408231124.00185.sean@enbaya.co.za>
Message-ID: <00c701c488f6$e21dc270$1300000a@spelling>

Hi Sean,

I guess the problem is because that is an external entity. You can use
entities in attribute values but those should be character entities.

So the following will be valid:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE test [
 <!ELEMENT test (#PCDATA)>
 <!ATTLIST test sample CDATA #IMPLIED>

 <!ENTITY val "someValue">

]>
<test sample="&val;">

</test>

while the following will report the same error you quoted:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE test [
 <!ELEMENT test (#PCDATA)>
 <!ATTLIST test sample CDATA #IMPLIED>

 <!ENTITY val SYSTEM "test.xsd">

]>
<test sample="&val;">

</test>

Best Regards,
George
-------------------------------------------------------------
George Cristian Bina mailto:george at 
<oXygen/> XML Editor - http://www.oxygenxml.com/


----- Original Message -----
From: "Sean Wheller" <sean at >
To: <oxygen-user at >
Sent: Monday, August 23, 2004 12:24 PM
Subject: [oXygen-user] XInclude and Entities


> Hi,
>
> A document with the following DocDecl
>
> <!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
>
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [
> <!ENTITY % xinclude SYSTEM
"/home/sean/apps/oxygen/docbook/dtd/xinclude.mod">
> %xinclude;
> <!ENTITY % global_entities SYSTEM "global.ent">
> %global_entities;
> ]>
>
> With XIncludes that use Entities provided by gobal.net
>
> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
> href="&prt02_supplychain;">
> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude">
> <para>
> <emphasis>FIXME: MISSING XINCLUDE CONTENT</emphasis>
> </para>
> </xi:fallback>
> </xi:include>
>
> I get an error, but to best of my knowledge the value of an attribute is
> allowed to be an entity
>
> F The external entity reference "&prt02_supplychain;" is not permitted in
an
> attribute value.
>
> Any ideas where the problem is?
>
> --
> Sean Wheller
> 084-8549408
> sean at 
> http://www.enbaya.co.za
> _______________________________________________
> oXygen-user mailing list
> oXygen-user at 
> http://www.oxygenxml.com/mailman/listinfo/oxygen-user
>


From bogus@does.not.exist.com  Tue Aug 24 03:09:56 2004
From: bogus@does.not.exist.com (George Cristian Bina)
Date: Tue, 24 Aug 2004 11:09:56 +0300
Subject: [oXygen-user] Big files
References: <CA47BB2706D4CE4497C233DB9FCDB571406422@blconexc1.sg.gr.fcc.es>
Message-ID: <013201c489b1$c013db40$1300000a@spelling>

Hi David,

I replied on the forum entry:
http://www.oxygenxml.com/forum/ftopic553.html

Best Regards,
George
-------------------------------------------------------------
George Cristian Bina mailto:george at 
<oXygen/> XML Editor - http://www.oxygenxml.com/


----- Original Message -----
From: "Perez Carmona, David" <DPerezCar at >
To: "Oxygen (E-mail)" <oxygen-user at >
Sent: Wednesday, August 18, 2004 11:37 AM
Subject: [oXygen-user] Big files



Hi,

What about the support with large XML files?
I've tried to open a 10 Mb file with Oxygen and Eclipse has died.  I give
210 Mb to Eclipse, and have 1 Gb of RAM.
Any hint to improve this behavior?

David


*************************************************************
Este correo ha sido procesado por el Antivirus del Grupo FCC
*************************************************************


----------------------------------------------------------------------------
----


> _______________________________________________
> oXygen-user mailing list
> oXygen-user at 
> http://www.oxygenxml.com/mailman/listinfo/oxygen-user
>


From bogus@does.not.exist.com  Tue Aug 24 03:30:26 2004
From: bogus@does.not.exist.com (Sean Wheller)
Date: Tue, 24 Aug 2004 10:30:26 +0200
Subject: [oXygen-user] Big files
In-Reply-To: <013201c489b1$c013db40$1300000a@spelling>
References: <CA47BB2706D4CE4497C233DB9FCDB571406422@blconexc1.sg.gr.fcc.es>
	<013201c489b1$c013db40$1300000a@spelling>
Message-ID: <200408241030.26021.sean@enbaya.co.za>

On Tuesday 24 August 2004 10:09, George Cristian Bina wrote:
> What about the support with large XML files?
> I've tried to open a 10 Mb file with Oxygen and Eclipse has died. ?I give
> 210 Mb to Eclipse, and have 1 Gb of RAM.
> Any hint to improve this behavior?

I have only ever experienced problems opening large files when the file is not 
indented (Pretty Printed). Is your file indented? If not emacs the file and 
add line breaks to parts of the document, say every 100 or 150 lines. Try 
open again. If the file opens use Oxygens Pretty Print and save. Close the 
file and try open it again. The performance should be better.
-- 
Sean Wheller
sean at 
http://www.enbaya.co.za


From bogus@does.not.exist.com  Tue Aug 24 22:29:04 2004
From: bogus@does.not.exist.com ()
Date: Wed, 25 Aug 2004 13:29:04 +1000
Subject: [oXygen-user] Some more help with interpreting validations errors
	please
Message-ID: <E97B4331B4C19943B69A80E15DE45C2601355575@mail1.agso.gov.au>

Hi Everyone,

First of all a big thanks to Sorin and George for helping fix my validation
errors that I sent to this list.

Secondly, I have tried to apply my (limited) understanding of those fixes to
the rest of the XML Schema.  I unfortunately can't work through what I think
is a complex structure to work out where I need to add the "import" and
"include" statements.

I have tarred and gzipped the GML and ISO 19139 schema that I am using and
made them available at the following URL:

http://www-test.ga.gov.au/asdd/work/ISO19139GML.tar.gz

I have generated an Oxygen project called smXML.xpr and loaded the following
XML Schema into that project:

Geometry.xsd
TemporalObjects.xsd
applicationSchema.xsd       bad
basicTypes.xsd
citation.xsd                bad
constraints.xsd
content.xsd                 bad
dataQuality.xsd             bad
distribution.xsd            bad
extent.xsd                  bad
generalFeatureModel.xsd
identification.xsd          bad
maintenance.xsd             bad
metadataApplication.xsd     bad
metadataEntity.xsd          bad
metadataExtension.xsd       bad
portrayalCatalogue.xsd      bad
referenceSystem.xsd         bad
scXMLbase.xsd
spatialRepresentation.xsd   bad

I have also noted which files do not *individually* validate by putting the
word "bad" next to the above file list.  The Geometry.xsd validates
individually.  However, if I validate some XML Schema that "import"
Geometry.xsd then Geometry.xsd has the following errors:

"http://www.w3.org/TR/xmlschema-1/#src-resolve	E src-resolve: Cannot resolve
the name 'gml:AbstractGeometryType' to a(n) 'type definition' component.
Geometry.xsd	file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd
37:80"

"http://www.w3.org/TR/xmlschema-1/#src-resolve	E src-resolve: Cannot resolve
the name 'gml:AbstractGeometricPrimitiveType' to a(n) 'type definition'
component.	Geometry.xsd
file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd	27:39"

"http://www.w3.org/TR/xmlschema-1/#src-resolve	E src-resolve: Cannot resolve
the name 'gml:PointType' to a(n) 'type definition' component.	Geometry.xsd
file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd	16:91"

"http://www.w3.org/TR/xmlschema-1/#src-resolve	E src-resolve: Cannot resolve
the name 'gml:Point' to a(n) 'element declaration' component.	Geometry.xsd
file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd	20:44"

"http://www.w3.org/TR/xmlschema-1/#src-resolve	E src-resolve: Cannot resolve
the name 'gml:_GeometricPrimitive' to a(n) 'element declaration' component.
Geometry.xsd	file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd
31:58"

"http://www.w3.org/TR/xmlschema-1/#src-resolve	E src-resolve: Cannot resolve
the name 'gml:_Geometry' to a(n) 'element declaration' component.
Geometry.xsd	file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd
41:48"


Similarly, if I validate TemporalObjects.xsd there are no errors yet if I
validate XML Schema in the project then those XML Schema that "import"
TemporalObjects.xsd indicate that TemporalObjects.xsd has the following
errors:

"http://www.w3.org/TR/xmlschema-1/#src-resolve	E src-resolve: Cannot resolve
the name 'gml:AbstractTimeObjectType' to a(n) 'type definition' component.
TemporalObjects.xsd
file:/E:/downloads/ISO19139/2004-08-17/stXML/TemporalObjects.xsd
23:65"

"http://www.w3.org/TR/xmlschema-1/#src-resolve	E src-resolve: Cannot resolve
the name 'gml:AbstractTimePrimitiveType' to a(n) 'type definition' component.
TemporalObjects.xsd
file:/E:/downloads/ISO19139/2004-08-17/stXML/TemporalObjects.xsd
13:38"

"http://www.w3.org/TR/xmlschema-1/#src-resolve	E src-resolve: Cannot resolve
the name 'gml:_TimePrimitive' to a(n) 'element declaration' component.
TemporalObjects.xsd
file:/E:/downloads/ISO19139/2004-08-17/stXML/TemporalObjects.xsd
17:53"

"http://www.w3.org/TR/xmlschema-1/#src-resolve	E src-resolve: Cannot resolve
the name 'gml:_TimeObject' to a(n) 'element declaration' component.
TemporalObjects.xsd
file:/E:/downloads/ISO19139/2004-08-17/stXML/TemporalObjects.xsd
27:50"


I believe that the problem has something to do with the link between the
ISO19139 XML Schema files and the GML XML Schema files.  I have somehow come
to this conclusion because of the following commonly occurring validation
error:

"E src-resolve: Cannot resolve the name 'gml:......' to a(n) 'type
definition' component."

Please note that the "......" represents different  GML types and elements.


"E src-resolve: Cannot resolve the name 'gml:AbstractTimeObjectType' to a(n)
'type definition' component.	TemporalObjects.xsd
file:/E:/downloads/ISO19139/2004-08-17/stXML/TemporalObjects.xsd
23:65"

How can a file be valid and also invalid?  Can anyone help me track down
which files need the "import" or "include" statements?

Thanks.


John Hockaday
Geoscience Australia
GPO Box 378
Canberra ACT 2601
(02) 6249 9735
http://www.ga.gov.au/ 
john.hockaday at 


From bogus@does.not.exist.com  Wed Aug 25 02:44:40 2004
From: bogus@does.not.exist.com (George Cristian Bina)
Date: Wed, 25 Aug 2004 10:44:40 +0300
Subject: [oXygen-user] Some more help with interpreting validations
	errorsplease
References: <E97B4331B4C19943B69A80E15DE45C2601355575@mail1.agso.gov.au>
Message-ID: <007c01c48a77$71a0a030$1300000a@spelling>

Hi John,

As you know oXygen uses Xerces for XML Schema validation. Xerces follows a
one schema file per namespace rule, that is if you import a schema in one
place then the following import statements will be disregarded and the
schema in the first encountered import will be used. Therefore you should
always refer to your schema master file in an import statement otherwise you
may get errors like the ones you quoted below.

In your case I found that you import the http://www.opengis.net/gml
namespace refering to two different schemas:

<xs:import namespace="http://www.opengis.net/gml" Geometry.xsd
file:/D:/test/current/ISO19139/2004-08-17/ssXML/Geometry.xsd 10:23
<xs:import namespace="http://www.opengis.net/gml"
schemaLocation="../../../GML3.1/GML-3.1.0-Draft-Schemas/base/geometryComplex
es.xsd"/>

and

<xs:import namespace="http://www.opengis.net/gml"
schemaLocation="../../../GML3.1/GML-3.1.0-Draft-Schemas/base/temporal.xsd"/>
TemporalObjects.xsd
file:/D:/test/current/ISO19139/2004-08-17/stXML/TemporalObjects.xsd 8:23
<xs:import namespace="http://www.opengis.net/gml"
schemaLocation="../../../GML3.1/GML-3.1.0-Draft-Schemas/base/temporal.xsd"/>

I guess this causes the errors.

If there is not a master schema for your namespace then you can just define
a schema with that target namespace and include all the files that define
components of that namespace and use that as the main schema file.

Best Regards,
George
-------------------------------------------------------------
George Cristian Bina mailto:george at 
<oXygen/> XML Editor - http://www.oxygenxml.com/


----- Original Message -----
From: <John.Hockaday at >
To: <oxygen-user at >
Sent: Wednesday, August 25, 2004 6:29 AM
Subject: [oXygen-user] Some more help with interpreting validations
errorsplease


> Hi Everyone,
>
> First of all a big thanks to Sorin and George for helping fix my
validation
> errors that I sent to this list.
>
> Secondly, I have tried to apply my (limited) understanding of those fixes
to
> the rest of the XML Schema.  I unfortunately can't work through what I
think
> is a complex structure to work out where I need to add the "import" and
> "include" statements.
>
> I have tarred and gzipped the GML and ISO 19139 schema that I am using and
> made them available at the following URL:
>
> http://www-test.ga.gov.au/asdd/work/ISO19139GML.tar.gz
>
> I have generated an Oxygen project called smXML.xpr and loaded the
following
> XML Schema into that project:
>
> Geometry.xsd
> TemporalObjects.xsd
> applicationSchema.xsd       bad
> basicTypes.xsd
> citation.xsd                bad
> constraints.xsd
> content.xsd                 bad
> dataQuality.xsd             bad
> distribution.xsd            bad
> extent.xsd                  bad
> generalFeatureModel.xsd
> identification.xsd          bad
> maintenance.xsd             bad
> metadataApplication.xsd     bad
> metadataEntity.xsd          bad
> metadataExtension.xsd       bad
> portrayalCatalogue.xsd      bad
> referenceSystem.xsd         bad
> scXMLbase.xsd
> spatialRepresentation.xsd   bad
>
> I have also noted which files do not *individually* validate by putting
the
> word "bad" next to the above file list.  The Geometry.xsd validates
> individually.  However, if I validate some XML Schema that "import"
> Geometry.xsd then Geometry.xsd has the following errors:
>
> "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
resolve
> the name 'gml:AbstractGeometryType' to a(n) 'type definition' component.
> Geometry.xsd file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd
> 37:80"
>
> "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
resolve
> the name 'gml:AbstractGeometricPrimitiveType' to a(n) 'type definition'
> component. Geometry.xsd
> file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd 27:39"
>
> "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
resolve
> the name 'gml:PointType' to a(n) 'type definition' component. Geometry.xsd
> file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd 16:91"
>
> "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
resolve
> the name 'gml:Point' to a(n) 'element declaration' component. Geometry.xsd
> file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd 20:44"
>
> "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
resolve
> the name 'gml:_GeometricPrimitive' to a(n) 'element declaration'
component.
> Geometry.xsd file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd
> 31:58"
>
> "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
resolve
> the name 'gml:_Geometry' to a(n) 'element declaration' component.
> Geometry.xsd file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd
> 41:48"
>
>
> Similarly, if I validate TemporalObjects.xsd there are no errors yet if I
> validate XML Schema in the project then those XML Schema that "import"
> TemporalObjects.xsd indicate that TemporalObjects.xsd has the following
> errors:
>
> "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
resolve
> the name 'gml:AbstractTimeObjectType' to a(n) 'type definition' component.
> TemporalObjects.xsd
> file:/E:/downloads/ISO19139/2004-08-17/stXML/TemporalObjects.xsd
> 23:65"
>
> "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
resolve
> the name 'gml:AbstractTimePrimitiveType' to a(n) 'type definition'
component.
> TemporalObjects.xsd
> file:/E:/downloads/ISO19139/2004-08-17/stXML/TemporalObjects.xsd
> 13:38"
>
> "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
resolve
> the name 'gml:_TimePrimitive' to a(n) 'element declaration' component.
> TemporalObjects.xsd
> file:/E:/downloads/ISO19139/2004-08-17/stXML/TemporalObjects.xsd
> 17:53"
>
> "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
resolve
> the name 'gml:_TimeObject' to a(n) 'element declaration' component.
> TemporalObjects.xsd
> file:/E:/downloads/ISO19139/2004-08-17/stXML/TemporalObjects.xsd
> 27:50"
>
>
> I believe that the problem has something to do with the link between the
> ISO19139 XML Schema files and the GML XML Schema files.  I have somehow
come
> to this conclusion because of the following commonly occurring validation
> error:
>
> "E src-resolve: Cannot resolve the name 'gml:......' to a(n) 'type
> definition' component."
>
> Please note that the "......" represents different  GML types and
elements.
>
>
> "E src-resolve: Cannot resolve the name 'gml:AbstractTimeObjectType' to
a(n)
> 'type definition' component. TemporalObjects.xsd
> file:/E:/downloads/ISO19139/2004-08-17/stXML/TemporalObjects.xsd
> 23:65"
>
> How can a file be valid and also invalid?  Can anyone help me track down
> which files need the "import" or "include" statements?
>
> Thanks.
>
>
> John Hockaday
> Geoscience Australia
> GPO Box 378
> Canberra ACT 2601
> (02) 6249 9735
> http://www.ga.gov.au/
> john.hockaday at 
>
> _______________________________________________
> oXygen-user mailing list
> oXygen-user at 
> http://www.oxygenxml.com/mailman/listinfo/oxygen-user
>


From bogus@does.not.exist.com  Wed Aug 25 13:04:38 2004
From: bogus@does.not.exist.com (Peter Charles)
Date: Wed, 25 Aug 2004 11:04:38 -0700
Subject: [oXygen-user] XSLT Debugger
Message-ID: <200408251804.i7PI4fSw025910@irony.sims.berkeley.edu>

Hello,

Is there any way to configure the XSLT Debugger to halt before entering all
templates?  

This would allow the user to run through the xml document and observe the
execution of the stylesheet(s).

Thanks

Peter

 



From bogus@does.not.exist.com  Thu Aug 26 03:14:02 2004
From: bogus@does.not.exist.com (George Cristian Bina)
Date: Thu, 26 Aug 2004 11:14:02 +0300
Subject: [oXygen-user] XSLT Debugger
References: <200408251804.i7PI4fSw025910@irony.sims.berkeley.edu>
Message-ID: <017101c48b44$a79d7e10$1300000a@spelling>

Hi Peter,

Currently you need to set manually breakpoints on all the templates.
Alternativelly you can look in the trace view to see the stylesheet trace
and clicking on the template entries will hightlight them in the stylesheet.

However, adding the possibility to specify break points using a list of
elements sounds like a really nice idea. I added this to our bugzilla and we
should implement it in a future oxygen release. Basically the user should be
able to specify an element either from the source or from the stylesheet and
when the debugger will enter such an element it will act as if there was a
breakpoint set there.

Best Regards,
George
-------------------------------------------------------------
George Cristian Bina mailto:george at 
<oXygen/> XML Editor - http://www.oxygenxml.com/


----- Original Message -----
From: "Peter Charles" <petefc at >
To: <oxygen-user at >
Sent: Wednesday, August 25, 2004 9:04 PM
Subject: [oXygen-user] XSLT Debugger


> Hello,
>
> Is there any way to configure the XSLT Debugger to halt before entering
all
> templates?
>
> This would allow the user to run through the xml document and observe the
> execution of the stylesheet(s).
>
> Thanks
>
> Peter
>
>
>
>
> _______________________________________________
> oXygen-user mailing list
> oXygen-user at 
> http://www.oxygenxml.com/mailman/listinfo/oxygen-user
>


From bogus@does.not.exist.com  Thu Aug 26 18:43:50 2004
From: bogus@does.not.exist.com ()
Date: Fri, 27 Aug 2004 09:43:50 +1000
Subject: [oXygen-user] Some more help with interpreting validations
	errorsplease
Message-ID: <E97B4331B4C19943B69A80E15DE45C2601355578@mail1.agso.gov.au>

George,

Thank you very much for replying to my email.  

It took me a while to work out what to do.  Probably because of my lack of
understanding of the W3C XML Schema standard.  ;--)  I fixed the problem by
tracking down that feature.xsd is the base XML Schema for GML (as you
suggested that I look for).  Once I imported that schema under the gml
namespace into the applicationSchema.xsd, Geometry.xsd and
TemporalObjects.xsd and fixed a couple of spelling mistakes then everything
validated.  It even validated after checking the "schema-full-checking"
option except for a repeating error in the GML Schema.

Thank you very much for all your help.


John

> -----Original Message-----
> From: George Cristian Bina [mailto:george at ] 
> Sent: Wednesday, 25 August 2004 5:45 PM
> To: Hockaday John; oxygen-user at 
> Subject: Re: [oXygen-user] Some more help with interpreting 
> validations errorsplease
> 
> 
> Hi John,
> 
> As you know oXygen uses Xerces for XML Schema validation. 
> Xerces follows a
> one schema file per namespace rule, that is if you import a 
> schema in one
> place then the following import statements will be disregarded and the
> schema in the first encountered import will be used. 
> Therefore you should
> always refer to your schema master file in an import 
> statement otherwise you
> may get errors like the ones you quoted below.
> 
> In your case I found that you import the http://www.opengis.net/gml
> namespace refering to two different schemas:
> 
> <xs:import namespace="http://www.opengis.net/gml" Geometry.xsd
> file:/D:/test/current/ISO19139/2004-08-17/ssXML/Geometry.xsd 10:23
> <xs:import namespace="http://www.opengis.net/gml"
> schemaLocation="../../../GML3.1/GML-3.1.0-Draft-Schemas/base/g
> eometryComplex
> es.xsd"/>
> 
> and
> 
> <xs:import namespace="http://www.opengis.net/gml"
> schemaLocation="../../../GML3.1/GML-3.1.0-Draft-Schemas/base/t
> emporal.xsd"/>
> TemporalObjects.xsd
> file:/D:/test/current/ISO19139/2004-08-17/stXML/TemporalObject
> s.xsd 8:23
> <xs:import namespace="http://www.opengis.net/gml"
> schemaLocation="../../../GML3.1/GML-3.1.0-Draft-Schemas/base/t
> emporal.xsd"/>
> 
> I guess this causes the errors.
> 
> If there is not a master schema for your namespace then you 
> can just define
> a schema with that target namespace and include all the files 
> that define
> components of that namespace and use that as the main schema file.
> 
> Best Regards,
> George
> -------------------------------------------------------------
> George Cristian Bina mailto:george at 
> <oXygen/> XML Editor - http://www.oxygenxml.com/
> 
> 
> ----- Original Message -----
> From: <John.Hockaday at >
> To: <oxygen-user at >
> Sent: Wednesday, August 25, 2004 6:29 AM
> Subject: [oXygen-user] Some more help with interpreting validations
> errorsplease
> 
> 
> > Hi Everyone,
> >
> > First of all a big thanks to Sorin and George for helping fix my
> validation
> > errors that I sent to this list.
> >
> > Secondly, I have tried to apply my (limited) understanding 
> of those fixes
> to
> > the rest of the XML Schema.  I unfortunately can't work 
> through what I
> think
> > is a complex structure to work out where I need to add the 
> "import" and
> > "include" statements.
> >
> > I have tarred and gzipped the GML and ISO 19139 schema that 
> I am using and
> > made them available at the following URL:
> >
> > http://www-test.ga.gov.au/asdd/work/ISO19139GML.tar.gz
> >
> > I have generated an Oxygen project called smXML.xpr and loaded the
> following
> > XML Schema into that project:
> >
> > Geometry.xsd
> > TemporalObjects.xsd
> > applicationSchema.xsd       bad
> > basicTypes.xsd
> > citation.xsd                bad
> > constraints.xsd
> > content.xsd                 bad
> > dataQuality.xsd             bad
> > distribution.xsd            bad
> > extent.xsd                  bad
> > generalFeatureModel.xsd
> > identification.xsd          bad
> > maintenance.xsd             bad
> > metadataApplication.xsd     bad
> > metadataEntity.xsd          bad
> > metadataExtension.xsd       bad
> > portrayalCatalogue.xsd      bad
> > referenceSystem.xsd         bad
> > scXMLbase.xsd
> > spatialRepresentation.xsd   bad
> >
> > I have also noted which files do not *individually* 
> validate by putting
> the
> > word "bad" next to the above file list.  The Geometry.xsd validates
> > individually.  However, if I validate some XML Schema that "import"
> > Geometry.xsd then Geometry.xsd has the following errors:
> >
> > "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
> resolve
> > the name 'gml:AbstractGeometryType' to a(n) 'type 
> definition' component.
> > Geometry.xsd 
> file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd
> > 37:80"
> >
> > "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
> resolve
> > the name 'gml:AbstractGeometricPrimitiveType' to a(n) 'type 
> definition'
> > component. Geometry.xsd
> > file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd 27:39"
> >
> > "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
> resolve
> > the name 'gml:PointType' to a(n) 'type definition' 
> component. Geometry.xsd
> > file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd 16:91"
> >
> > "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
> resolve
> > the name 'gml:Point' to a(n) 'element declaration' 
> component. Geometry.xsd
> > file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd 20:44"
> >
> > "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
> resolve
> > the name 'gml:_GeometricPrimitive' to a(n) 'element declaration'
> component.
> > Geometry.xsd 
> file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd
> > 31:58"
> >
> > "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
> resolve
> > the name 'gml:_Geometry' to a(n) 'element declaration' component.
> > Geometry.xsd 
> file:/E:/downloads/ISO19139/2004-08-17/ssXML/Geometry.xsd
> > 41:48"
> >
> >
> > Similarly, if I validate TemporalObjects.xsd there are no 
> errors yet if I
> > validate XML Schema in the project then those XML Schema 
> that "import"
> > TemporalObjects.xsd indicate that TemporalObjects.xsd has 
> the following
> > errors:
> >
> > "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
> resolve
> > the name 'gml:AbstractTimeObjectType' to a(n) 'type 
> definition' component.
> > TemporalObjects.xsd
> > file:/E:/downloads/ISO19139/2004-08-17/stXML/TemporalObjects.xsd
> > 23:65"
> >
> > "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
> resolve
> > the name 'gml:AbstractTimePrimitiveType' to a(n) 'type definition'
> component.
> > TemporalObjects.xsd
> > file:/E:/downloads/ISO19139/2004-08-17/stXML/TemporalObjects.xsd
> > 13:38"
> >
> > "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
> resolve
> > the name 'gml:_TimePrimitive' to a(n) 'element declaration' 
> component.
> > TemporalObjects.xsd
> > file:/E:/downloads/ISO19139/2004-08-17/stXML/TemporalObjects.xsd
> > 17:53"
> >
> > "http://www.w3.org/TR/xmlschema-1/#src-resolve E src-resolve: Cannot
> resolve
> > the name 'gml:_TimeObject' to a(n) 'element declaration' component.
> > TemporalObjects.xsd
> > file:/E:/downloads/ISO19139/2004-08-17/stXML/TemporalObjects.xsd
> > 27:50"
> >
> >
> > I believe that the problem has something to do with the 
> link between the
> > ISO19139 XML Schema files and the GML XML Schema files.  I 
> have somehow
> come
> > to this conclusion because of the following commonly 
> occurring validation
> > error:
> >
> > "E src-resolve: Cannot resolve the name 'gml:......' to a(n) 'type
> > definition' component."
> >
> > Please note that the "......" represents different  GML types and
> elements.
> >
> >
> > "E src-resolve: Cannot resolve the name 
> 'gml:AbstractTimeObjectType' to
> a(n)
> > 'type definition' component. TemporalObjects.xsd
> > file:/E:/downloads/ISO19139/2004-08-17/stXML/TemporalObjects.xsd
> > 23:65"
> >
> > How can a file be valid and also invalid?  Can anyone help 
> me track down
> > which files need the "import" or "include" statements?
> >
> > Thanks.
> >
> >
> > John Hockaday
> > Geoscience Australia
> > GPO Box 378
> > Canberra ACT 2601
> > (02) 6249 9735
> > http://www.ga.gov.au/
> > john.hockaday at 
> >
> > _______________________________________________
> > oXygen-user mailing list
> > oXygen-user at 
> > http://www.oxygenxml.com/mailman/listinfo/oxygen-user
> >
> 
> 


From bogus@does.not.exist.com  Fri Aug 27 04:45:58 2004
From: bogus@does.not.exist.com (Ian Tindale)
Date: Fri, 27 Aug 2004 10:45:58 +0100
Subject: [oXygen-user] Any news on .js support yet?
Message-ID: <9f3b0068040827024560b5a406@mail.gmail.com>

Any news on supporting external .js javascript files yet? At the very
least, some sort of syntax highlighting upon recognistion of the file
would be extremely useful.
-- 
Ian K Tindale
http://tindale.dyn.nu/

From bogus@does.not.exist.com  Fri Aug 27 06:15:55 2004
From: bogus@does.not.exist.com (Sorin Ristache)
Date: Fri, 27 Aug 2004 14:15:55 +0300
Subject: [oXygen-user] Any news on .js support yet?
In-Reply-To: <9f3b0068040827024560b5a406@mail.gmail.com>
References: <9f3b0068040827024560b5a406@mail.gmail.com>
Message-ID: <412F17EB.6020709@oxygenxml.com>

Hello,

We are working on the JavaScript syntax highlight.

Best regards,
Sorin Ristache

http://www.oxygenxml.com/
Syncro Soft ltd.


Ian Tindale wrote:

>Any news on supporting external .js javascript files yet? At the very
>least, some sort of syntax highlighting upon recognistion of the file
>would be extremely useful.
>  
>